On Home Assistant 2026.10 or older? Open it in HACS
- Installs
- 54 sharing analytics
- GitHub stars
- 5
- Connection
- Works locally
- Upkeep
- Updated in the last 6 months
- Version
- v1.2.0,
- Category
- Energy, Meters and monitoring
- Kind
- Marketplace integration
- Brand
- HomeWizard
- Needs
- Needs the Marketplace (HACS on 2026.10 and older)
- Domain
homewizard_realtime_push- Issues
- Report an issue
Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation.
About
HomeWizard Realtime Push delivers fast power readings from a HomeWizard P1 meter, pushed over the local API v2 WebSocket. The meter sends each reading itself instead of being polled, and the update rate can be set between about every second and every 5 seconds, with automatic throttling when Home Assistant cannot keep up. It adds a power sensor, a current update interval sensor and a status binary sensor on a separate device named after the meter with Realtime added. It runs next to the official HomeWizard integration, which stays useful for history and the Energy dashboard. Entities turn unavailable when data stops, and repair notices appear if the meter stops pushing or updates arrive slower than configured. The meter is usually found automatically on the network and added in the UI.
Automatic summary of the README and code of tkaspersNL/homeassistant-homewizard-realtime-push. Something wrong, or are you the maintainer and want your own text here? Get in touch
Shows in Vulpo
Chart card, Apple Watch.Installs over time
#1,519 of 1,584 Marketplace integrations. Installs sharing analytics.
Supports
- Works locallyTalks to your devices on your own network. No vendor cloud in between.
- Found by itselfHome Assistant spots it on the network and offers to add it.
- From the MarketplaceInstalled through the Marketplace, formerly HACS.
- Actively maintainedIts author released or pushed a change in the last six months.
Provides
- Sensors
Setting it up
Install it from the Marketplace and restart Home Assistant, then add it under Settings, Devices and services.
Set up HomeWizard Realtime Push
- IP addressThe IP address of the P1 meter, as shown in the HomeWizard app or your router.
Change the IP address
- IP addressThe new IP address of the P1 meter.
After setup
- Update speedRealtime follows your meter: about 1s on a DSMR 5 meter, 10s on older meters. See the README for how much storage each speed uses.
Texts from the code of tkaspersNL/homeassistant-homewizard-realtime-push.
Entities
- Binary sensorsStatus
- SensorsPower, Current update interval
Troubleshooting
- DiagnosticsDownloads a diagnostics file to attach to a bug report.
- Repair noticesNotices it can show in Settings, Repairs:Is not pushing measurements, Updates slower than configured
From the README
Fast power readings from a HomeWizard P1 meter in Home Assistant, pushed by the meter over its local API v2 WebSocket instead of polled. You choose an update rate between every telegram (about 1s) and 5s, with automatic throttling if Home Assistant can't keep up.
It is built for things that need to react quickly to the grid connection, such as a home battery controller or a load balancer for an EV charger. It runs next to the official HomeWizard integration and does not replace it.
Information
- Installs
- 54 sharing analytics
- GitHub stars
- 5
- Connection
- Works locally
- Upkeep
- Updated in the last 6 months
- Version
- v1.2.0,
- Category
- Energy, Meters and monitoring
- Kind
- Marketplace integration
- Brand
- HomeWizard
- Needs
- Needs the Marketplace (HACS on 2026.10 and older)
- Domain
homewizard_realtime_push- Issues
- Report an issue
