EcoFlow IoT

EcoFlow IoT

• Region
• Access Key
• Secret Key

Also asked when signing in again.

After setup

• Use MQTT for live data
• HTTP poll interval (seconds)How often to poll the HTTP API (fallback when MQTT is unavailable, and the cadence for refreshing HTTP-only values).
• MQTT staleness threshold (seconds)If no MQTT message arrives within this window, the integration polls HTTP.
• MQTT active refresh interval (seconds)How often to actively request a fresh data snapshot over MQTT (publishing a "latestQuotas" get, the same thing the EcoFlow app does). Devices slow their push rate when idle, so a passive subscription goes stale even while connected; this keeps the data flowing. Set to 0 to disable and rely only on what the device pushes plus the HTTP fallback.
• Disable MQTT TLS certificate verification (insecure)Connects to the EcoFlow MQTT broker without verifying its TLS certificate. Only enable this if the connection fails because your system cannot validate the broker's certificate chain — it exposes the broker credentials and all live data to interception. Leave off for normal use.
• Invert Stream grid power signSome Stream units report grid power with the sign inverted — they show power fed into the grid as positive instead of negative, the opposite of Home Assistant's convention. This depends on the model and firmware, so it can't be detected automatically. Leave this on (the default) and the sign is corrected: Grid power reads negative while you export, and the Grid import / export energy sensors count in the right direction. Turn it off only if your unit already matches Home Assistant — i.e. exporting to the grid already shows Grid power as negative (import positive, export negative). If you change this setting, also tick "Reset grid import/export energy totals" below — the existing totals were built up in the wrong direction and won't correct themselves.
• Reset grid import/export energy totals & historyOne-shot action: tick this and save to fully reset the Grid import energy and Grid export energy sensors. It zeroes the live counters and deletes their recorded history and Energy Dashboard statistics, so the old wrong-direction data is gone and they start fresh from zero. Recommended after changing the sign setting above. Leave it off for normal use.