Uponorx265 for Home Assistant (Marketplace integration)

Installs: 152 sharing analytics
GitHub stars: 28
Connection: Works locally
Upkeep: Updated in the last 6 months
Version: 1.1.10, October 13, 2026
Category: Climate
Kind: Marketplace integration
Needs: Needs the Marketplace (HACS on 2026.10 and older)
Domain: uponorx265
Source: github.com/dave-code-ruiz/uponorX265
Issues: Report an issue

Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation.

About

Uponorx265 is an integration for Uponor Smatrix Pulse X-265 and X-245 heating and cooling systems, working through the R-208 communication module. It communicates locally and adds a climate entity for each thermostat, along with sensors for room temperature, humidity, floor temperature and gateway status. Binary sensors cover valves, the pump relay and boiler requests, and switches handle away, cooling mode, bypass and firmware updates. An installer mode makes settings such as pump control and floor temperature limits writable, otherwise they appear as read-only sensors. Several gateways can be added as independent instances, and up to four controllers with twelve thermostats each are supported. If the gateway gets a new IP address, Home Assistant can find it again through DHCP discovery, and setup is done in the UI.

Automatic summary of the README and code of dave-code-ruiz/uponorX265. Something wrong, or are you the maintainer and want your own text here? Get in touch

Supports

Works locally Talks to your devices on your own network. No vendor cloud in between.
Found by itself Home Assistant spots it on the network and offers to add it.
From the Marketplace Installed through the Marketplace, formerly HACS.
Actively maintained Its author released or pushed a change in the last six months.

Provides

Climate
Switches
Sensors

Setting it up

Install it from the Marketplace and restart Home Assistant, then add it under Settings, Devices and services.

Uponorx265

Host or IP address of the Uponor controller
Name of the integration instance
Optional unique identifier (must be unique across entries)

Controllers

Create controller sensors
Name of controller 1
Name of controller 2
Name of controller 3
Name of controller 4

Sensors

Create room temperature sensor
Create valve binary sensor
Create average inclusion switch
Create controller relay/IO sensors
Installer mode (relays, bypass, pump control and floor limits)

Uponor Thermostats

Name of C1 Thermostat 1
Name of C1 Thermostat 2
Name of C1 Thermostat 3
Name of C1 Thermostat 4
Name of C1 Thermostat 5
Name of C1 Thermostat 6
Name of C1 Thermostat 7
Name of C1 Thermostat 8
Name of C1 Thermostat 9
Name of C1 Thermostat 10
Name of C1 Thermostat 11
Name of C1 Thermostat 12
Name of C2 Thermostat 1
Name of C2 Thermostat 2
Name of C2 Thermostat 3

After setup

Host or IP address of the Uponor controller
Create room temperature sensor
Create valve binary sensor
Create average inclusion switch
Create controller relay/IO sensors
Installer mode (relays, bypass, pump control and floor limits)

Texts from the code of dave-code-ruiz/uponorX265.

Entities

Binary sensorsValve, Pump relay, Boiler request
NumbersFloor temperature min limit, Floor temperature max limit
SelectsPump control, Controller relays
SensorsGateway status, Status, Floor temperature, Floor temperature min limit, Floor temperature max limit, Room temperature, Humidity, Average room temperature, Controller relays, Pump control
SwitchesAway, Cooling mode, HA controlled, Included in average, Bypass, Automatic firmware update

Actions

Dump Hardware InfoReturns raw hardware IDs and capability flags for every thermostat and controller. The response is shown directly in Developer Tools → Services. Useful for identifying unknown device models.
Dump Raw DataReturns the complete raw data dictionary received from the gateway. Useful for inspecting all available variables and their current values.
Set VariableSend a variable update to the Uponor APIFields: Variable Name, Variable Value

From the README

Uponor Smatrix Pulse X-265 or X-245 with R-208 heating/cooling integration for Home Assistant.
Forked and extended from dave-code-ruiz/uponorX265, which was forked from the original (now unmaintained) asev/homeassistant-uponor.

From the README of dave-code-ruiz/uponorX265, MIT License. Shortened.