Frigidaire for Home Assistant (Marketplace integration)

Installs: 201 sharing analytics
GitHub stars: 58
Connection: Uses the vendor's cloud
Upkeep: Updated in the last 6 months
Version: 0.1.55, October 18, 2026
Category: Climate
Kind: Marketplace integration
Needs: Needs the Marketplace (HACS on 2026.10 and older)
Domain: frigidaire
Source: github.com/bm1549/home-assistant-frigidaire
Issues: Report an issue

Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation.

About

Frigidaire is a Marketplace integration for Frigidaire WiFi-connected air conditioners and dehumidifiers, using the vendor's cloud API. Air conditioners get a climate entity with cool, auto, fan only, dry and off modes, fan speed, target temperature, a sleep preset, vertical swing and an on/off timer. Dehumidifiers get modes, target humidity control and fan speed selection. Optional per-device entities include an ionizer, display light, child lock, filter problem sensor, bucket status and filter runtime. An opt-in heat mode can be turned on for air conditioners confirmed to heat, and an opt-in compressor estimate adds a diagnostic sensor based on temperature and refines the reported activity. Setup is done in the UI with a username and password.

Automatic summary of the README and code of bm1549/home-assistant-frigidaire. Something wrong, or are you the maintainer and want your own text here? Get in touch

Supports

Uses the vendor's cloud Needs an internet connection and an account with the vendor.
From the Marketplace Installed through the Marketplace, formerly HACS.
Actively maintained Its author released or pushed a change in the last six months.

Provides

Climate
Humidifiers
Switches
Sensors

Setting it up

Install it from the Marketplace and restart Home Assistant, then add it under Settings, Devices and services.

Connect

Password
Username

Choose a device

Ionizer (Clean Air Mode)
Display Light
Child Lock
Check FilterProblem sensor that turns on when the filter state is CLEAN, CHANGE, or BUY. Use it to trigger filter-maintenance notifications.
Bucket StatusShows Full when the water bucket needs emptying and Empty otherwise. Dehumidifiers only — models that report no bucket signal show as unavailable.
Filter runtimeCumulative air-filter runtime reported by the appliance in native seconds. Home Assistant converts it to the configured display unit.
Enable heat mode (confirmed heat-capable device only)Explicit opt-in for this appliance only. This does not detect heating capability; enable only after confirming the device supports heat. Temperature limits are unchanged.
Enable compressor estimateOpt-in temperature-based estimate, not device telemetry. Adds a Compressor Estimate diagnostic sensor and refines hvac_action while enabled on appliances that do not report modeState.
Cooling hysteresis (degrees)Temperature deadband around the setpoint used by the estimate. Zero disables the deadband.
Compressor off delay (seconds)How long the room must remain below the lower deadband boundary before the estimate changes to idle.

Re-authenticate Frigidaire

Password

After setup

Ionizer (Clean Air Mode)
Display Light
Child Lock
Check FilterProblem sensor that turns on when the filter state is CLEAN, CHANGE, or BUY. Use it to trigger filter-maintenance notifications.
Bucket StatusShows Full when the water bucket needs emptying and Empty otherwise. Dehumidifiers only — models that report no bucket signal show as unavailable.
Filter runtimeCumulative air-filter runtime reported by the appliance in native seconds. Home Assistant converts it to the configured display unit.
Enable heat mode (confirmed heat-capable device only)Explicit opt-in for this appliance only. This does not detect heating capability; enable only after confirming the device supports heat. Temperature limits are unchanged.
Enable compressor estimateOpt-in temperature-based estimate, not device telemetry. Adds a Compressor Estimate diagnostic sensor and refines hvac_action while enabled on appliances that do not report modeState.
Cooling hysteresis (degrees)Temperature deadband around the setpoint used by the estimate. Zero disables the deadband.
Compressor off delay (seconds)How long the room must remain below the lower deadband boundary before the estimate changes to idle.

Texts from the code of bm1549/home-assistant-frigidaire.

Troubleshooting

DiagnosticsDownloads a diagnostics file to attach to a bug report.

From the README

A Home Assistant integration for Frigidaire WiFi-connected appliances, using the Frigidaire 2.0 (Electrolux) cloud API.
HVAC modes: Cool, Auto (Eco), Fan Only, Dry, Off
Fan speed: Auto, Low, Medium, High
Target temperature control (°F and °C)
Preset modes: Sleep
Swing modes: Vertical, Off
ON/OFF timer control (30-minute increments, up to 24 hours)
Extra state attributes: check_filter, reported_fan_speed, and active_alerts; the legacy current_fan_speed alias is retained for existing templates
hvac_action reflects the mode the appliance reports it is actually running, so an Eco/Auto unit shows cooling vs fan as it cycles rather than the requested mode

From the README of bm1549/home-assistant-frigidaire, MIT License. Shortened.