Plugwise for Home Assistant (built-in integration)

About

Plugwise is a built-in Home Assistant integration that connects to Plugwise Smile gateways over the local network. It adds climate control, a domestic hot water heater, and entities for boiler, cooling and electricity readings from devices such as Adam, Smile-T and P1. Selects cover modes and schedules such as gateway mode, regulation mode and thermostat schedule, while numbers adjust setpoints and temperature offset. A reboot button and switches for cooling, comfort mode, lock and relay are also provided. Home Assistant can discover the gateway on the network, and setup is done in the UI. New devices appear automatically, devices that are gone are removed, and connection settings can be changed later without removing the integration.

Automatic summary of Home Assistant's source code. Something wrong? Get in touch

Supports

Works locally Talks to your devices on your own network. No vendor cloud in between.
Set up in the UI Add it in Settings, Devices and services. Nothing to download.
Found by itself Home Assistant spots it on the network and offers to add it.
Adds new devices New devices show up without setting it up again.
Cleans up devices Devices that are gone are removed by themselves.
Change settings later Its connection settings can change without removing it.
Platinum quality Home Assistant's own rating of its code and setup experience.
Updated with Home Assistant Ships and updates with every Home Assistant release.

Provides

Climate
Water heaters
Switches
Sensors

Setting it up

Home Assistant usually finds it on the network and offers to add it. It can also be added by hand under Settings, Devices and services.

Connect to the Smile

IP addressThe hostname or IP address of your Smile. You can find it in your router or the Plugwise app.
Smile IDThe Smile ID printed on the label on the back of your Adam, Smile-T, or P1.
PortBy default your Smile uses port 80, normally you should not have to change this.
Smile usernameDefault is smile, or stretch for the legacy Stretch.

Change the connection

IP addressThe hostname or IP address of your Smile. You can find it in your router or the Plugwise app.
PortBy default your Smile uses port 80, normally you should not have to change this.

Texts from Home Assistant's source code, Apache License 2.0.

Entities

Binary sensorsCompressor state, Cooling enabled, Cooling, DHW state, Flame state, Heating, Plugwise notification, Secondary boiler state
ButtonsReboot
NumbersDomestic hot water setpoint, Maximum boiler temperature setpoint, Temperature offset
SelectsDHW mode, Gateway mode, Regulation mode, Thermostat schedule, Zone profile
SensorsCooling setpoint, DHW temperature, DHW setpoint, Electricity consumed, Electricity consumed interval, Electricity consumed off-peak cumulative, Electricity consumed off-peak interval, Electricity consumed off-peak point, Electricity consumed peak cumulative, Electricity consumed peak interval, Electricity consumed peak point, Electricity consumed point, and 34 more
SwitchesCooling, DHW comfort mode, Lock, Relay
Water heatersDomestic hot water