victron for Home Assistant (Marketplace integration)

Installs: 1.9k sharing analytics
GitHub stars: 323
Connection: Works locally
Upkeep: Updated in the last 6 months
Version: v0.6.4, October 26, 2026
Category: Energy, Solar and batteries
Kind: Marketplace integration
Brand: Victron
Needs: Needs the Marketplace (HACS on 2026.10 and older)
Domain: victron
Source: github.com/sfstar/hass-victron
Issues: Report an issue

Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation.

Screenshots From the README of sfstar/hass-victron.

About

Victron is an integration that reads data from a Victron GX device over Modbus and runs locally. It scans the registers the GX device provides and creates entities for each one, exposed as binary sensors, buttons, numbers, selects, sensors and switches. Write support can be enabled and limits can be set, and the writable number entities can optionally use stepped sliders. Settings cover the grid AC voltage and current limit, the battery DC voltage and current limit, and the phase configuration of the system. Options allow rescanning devices and changing the update interval, and the integration is set up in the UI with a host and port. The README notes it was not tested with three-phase systems, and older firmware may not expose all registers.

Automatic summary of the README and code of sfstar/hass-victron. Something wrong, or are you the maintainer and want your own text here? Get in touch

Supports

Works locally Talks to your devices on your own network. No vendor cloud in between.
From the Marketplace Installed through the Marketplace, formerly HACS.
Actively maintained Its author released or pushed a change in the last six months.

Provides

Switches
Sensors

Setting it up

Install it from the Marketplace and restart Home Assistant, then add it under Settings, Devices and services.

Connect

Host
Port
update interval in (s)
Enables write support and allows setting write limits

Advanced

The AC voltage of your grid in V
The AC (per phase) current limit of your grid in A
The DC voltage of your battery in V
The DC current limit of your battery in A
The phase configuration of your system
Use stepped sliders for writeable number entities

Change the connection

Host
Port

After setup

Rescan available devices. This will rescan all available devices
Update interval in (s)
The AC voltage of your grid in V
The AC (per phase) current limit of your grid in A
The DC voltage of your battery in V
The DC current limit of your battery in A
The phase configuration of your system
Use stepped sliders for writeable number entities
switch to read only mode if unchecked (when submitted)
Rescan available devices. This will rescan all available devices
Update interval in (s)
Enable write support
The AC voltage of your grid in V
The AC current limit of your grid in A
The DC voltage of your battery in V
The DC current limit of your battery in A
The phase configuration of your system
Use stepped sliders for writeable number entities

Texts from the code of sfstar/hass-victron.

From the README

This integration scans for all available registers of a provided GX device. It then uses the defined register ledgers to create entities for each and every register that is provided by the GX device.

From the README of sfstar/hass-victron, Apache License 2.0. Shortened.