my-PV for Home Assistant (Marketplace integration)

Installs: 142 sharing analytics
GitHub stars: 12
Connection: Works locally
Upkeep: Updated in the last 6 months
Version: 0.0.1rc7, October 16, 2026
Category: Energy, Solar and batteries
Kind: Marketplace integration
Needs: Needs the Marketplace (HACS on 2026.10 and older)
Domain: my_pv
Source: github.com/my-PV/home-assistant-integration
Issues: Report an issue

Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation.

About

my-PV is an integration that connects my-PV solar-powered water heating devices to Home Assistant over the local network. It supports the AC ELWA 2, the AC•THOR range, the HEA•THOR IoT and the SOL•THOR, while the ELWA immersion heater and the WiFi Meter are not supported. It adds sensors for network mode, phase currents, mains frequency, PV power, device status and several temperatures, plus a water heater entity. Controls cover boost mode, manual boost, maximum power, boost target temperature and hysteresis limits. Data is polled every 5 seconds. Home Assistant can discover the device on the network, and setup in the UI asks for the host and a password or device key.

Automatic summary of the README and code of my-PV/home-assistant-integration. Something wrong, or are you the maintainer and want your own text here? Get in touch

Supports

Works locally Talks to your devices on your own network. No vendor cloud in between.
Found by itself Home Assistant spots it on the network and offers to add it.
From the Marketplace Installed through the Marketplace, formerly HACS.
Actively maintained Its author released or pushed a change in the last six months.

Provides

Water heaters
Switches
Sensors

Setting it up

Install it from the Marketplace and restart Home Assistant, then add it under Settings, Devices and services.

my-PV Device

HostThe IP address or hostname of your my-PV device.

Password

PasswordThe password of your my-PV device. If no custom password is set you have to use the devicekey which can be found under the ⓘ info menu of your my-PV device. For the HEA•THOR IoT you can find the devicekey on the device label.

Also asked when at the discovery auth step and signing in again.

Texts from the code of my-PV/home-assistant-integration.

Entities

Binary sensorsBlock Status
NumbersMaximum power, Boost target temperature, Minimum hysteresis, Maximum hysteresis
SelectsBoost mode
SensorsNetwork mode, Current phase L1, Current phase L2, Current phase L3, Mains frequency, PV power, Device status, Temperature 1, Temperature 2, Temperature 3, Temperature 4, Device temperature, and 6 more
SwitchesBoost active, Boost mode, Manual boost