Reolink Stamina for Home Assistant (Marketplace integration)

On Home Assistant 2026.10 or older? Open it in HACS

Installs: 53 sharing analytics
GitHub stars: 19
Connection: Works locally
Upkeep: Updated in the last 6 months
Version: v1.9.2, October 21, 2026
Category: Security and safety, Cameras
Kind: Marketplace integration
Brand: Reolink
Needs: Needs the Marketplace (HACS on 2026.10 and older)
Domain: reolink_stamina
Source: github.com/marl1w/reolink-stamina-ha
Issues: Report an issue

Shows in Vulpo Quick Toggle card, Chart card, Apple Watch, Control Center.

Scan with your iPhone

Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation.

About

Reolink Stamina is a companion integration that gathers Reolink NVR detections into one timeline and syncs clips to cloud storage. It shows person, vehicle and animal detections from every camera on a single panel in the Home Assistant sidebar, and it reuses the devices and recordings already provided by the Reolink integration. A per-recorder cloud sync switch uploads a clip of each detection, using a storage connection already set up in Home Assistant such as OneDrive, Google Drive, WebDAV, SFTP or Synology. Sensors report quota used and available, clips stored, queued uploads, upload totals, the last upload and the last error. Options cover detection-only filtering, stream quality for browsing, clip padding before and after a detection, and how unusual detections are marked per camera. It works locally, is found automatically on the network and is added from the interface without extra credentials.

Automatic summary of the README and code of marl1w/reolink-stamina-ha. Something wrong, or are you the maintainer and want your own text here? Get in touch

Shows in Vulpo

Quick Toggle card, Chart card, Apple Watch, Control Center.

Download Vulpo

Installs over time

Oct 21Nov 15

#1,548 of 1,599 Marketplace integrations. Installs sharing analytics.

Supports

Works locallyTalks to your devices on your own network. No vendor cloud in between.
Found by itselfHome Assistant spots it on the network and offers to add it.
From the MarketplaceInstalled through the Marketplace, formerly HACS.
Actively maintainedIts author released or pushed a change in the last six months.

Provides

Switches
Sensors

Setting it up

Install it from the Marketplace and restart Home Assistant, then add it under Settings, Devices and services.

After setup

Show detections onlyOn: person, vehicle and animal, with motion as a filter. Off also brings back scheduled and unlabelled recordings, which dominate a 24/7 recorder.
Restrict the panel to administratorsOff lets non-admin users open the panel.
Verify the recorder's HTTPS certificateOff suits the self-signed certificate Reolink ships. On only if you installed one this Home Assistant trusts.
Stream used for browsingLow resolution searches faster. Playback and downloads can still use high.
Event segment lengthHow finely long recordings split into rows. 0 lists one row per file.
Estimated pre-rollWhere the trigger marker goes for cameras that do not report their own.
Start playback before the detectionWhere the playhead opens inside the clip. It does not change the clip.
Clip: seconds before the first detectionOn 24/7 footage, where a trimmed clip starts before the first detection.
Clip: seconds after the last detectionAnd where it ends, after the last one clears.
How much to markA row is marked when it is unusual for its camera and unusual at all. This moves the second. Across nine cameras the three came out at roughly 1.6, 4 and 9 marks a day.
What each camera is compared withEvery camera is judged against its own past first. This decides what a camera with too little history may borrow from, and which cameras count as having fired before one another. Keep recorders apart only if they cover different properties.

Texts from the code of marl1w/reolink-stamina-ha.

Entities

SensorsQuota used, Quota available, Clips stored, Queued uploads, Uploads since restart, Unusual uploads since restart, Last upload, Last error
SwitchesCloud sync

Troubleshooting

DiagnosticsDownloads a diagnostics file to attach to a bug report.
Repair noticesNotices it can show in Settings, Repairs:Reolink Stamina cannot read the Reolink integration

From the README

Your NVR has the memory. This has the stamina.
Reolink hardware records diligently and then makes the footage tedious to get at: one camera at a time, one app or one folder at a time, and nothing that survives the recorder being stolen. Reolink Stamina closes that gap from inside Home Assistant.

From the README of marl1w/reolink-stamina-ha, MIT License. Shortened.