SNMP Printer for Home Assistant (Marketplace integration)

Installs: 188 sharing analytics
GitHub stars: 17
Connection: Works locally
Upkeep: Updated in the last 6 months
Version: v1.3.0, October 5, 2026
Category: Computers and network, Printers
Kind: Marketplace integration
Needs: Needs the Marketplace (HACS on 2026.10 and older)
Domain: snmp_printer
Source: github.com/DSorlov/snmp_printer
Issues: Report an issue

Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation.

About

SNMP Printer is an integration that reads status information from network printers over SNMP. It adds sensors for printer status, page count, cover status, errors, display text and supply levels such as black, cyan, magenta and yellow toner. It runs locally and can find printers on the network by itself, or a printer can be added by IP address, scanning a network range, or entering details manually. Connection settings cover the SNMP version, community string, and for the newer version a username with authentication and privacy protocols and keys. Sensors keep the last known values while the printer is offline, so toner levels can still be read. An action can show text on the printer's screen, where the printer supports it.

Automatic summary of the README and code of DSorlov/snmp_printer. Something wrong, or are you the maintainer and want your own text here? Get in touch

Supports

Works locally Talks to your devices on your own network. No vendor cloud in between.
Found by itself Home Assistant spots it on the network and offers to add it.
From the Marketplace Installed through the Marketplace, formerly HACS.
Actively maintained Its author released or pushed a change in the last six months.

Provides

Sensors

Setting it up

Install it from the Marketplace and restart Home Assistant, then add it under Settings, Devices and services.

Configure SNMP Printer

IP Address
Port
SNMP Version
Community String
Username
Authentication Protocol
Authentication Key
Privacy Protocol
Privacy Key
Update Interval (seconds)

Scan Network for Printers

Network range (CIDR, e.g. 192.168.1.0/24)
SNMP Version
Community String
Port

Select Printer

Printer

After setup

Community String
Username
Authentication Protocol
Authentication Key
Privacy Protocol
Privacy Key
Update Interval (seconds)
Device name source

Texts from the code of DSorlov/snmp_printer.

Entities

SensorsStatus, Page count, Cover status, Errors, Display, Black, Cyan, Magenta, Yellow, Light cyan, Light magenta, Photo, and 5 more

Actions

Display TextDisplay text on the printer's screen (if supported)Fields: Device, Text

From the README

Are you tired of different printers and different integrations? I was, this is a one-to-rule-them-all integration for getting status about your printers. This integration supports automatic discovery and manual configuration of printers, providing detailed status information, supply levels, and automation capabilities.
:mag: Automatic Discovery: Automatically discovers SNMP-enabled printers via Zeroconf/mDNS
:printer: Wide Printer Support: Compatible with Brother, Canon, HP, Konica Minolta, Kyocera, Lexmark, OKI, Panasonic, Ricoh, Samsung, Sharp, and Xerox printers
:bar_chart: Monitoring: Track printer status, toner levels, paper trays, drums, and more
:wrench: SNMP Version Configuration: Support for SNMP v1, v2c, and v3
:floppy_disk: Cached Values: Remembers last known sensor values when printer is offline, so you can check toner levels without turning on the printer
:robot: Automation Ready: Trigger automations based on printer events

From the README of DSorlov/snmp_printer, MIT License. Shortened.