Keenetic Router Pro for Home Assistant (Marketplace integration)

Installs: 224 sharing analytics
GitHub stars: 45
Connection: Works locally
Upkeep: Updated in the last 6 months
Version: v1.40, October 20, 2026
Category: Computers and network, Routers and network
Kind: Marketplace integration
Brand: Keenetic
Needs: Needs the Marketplace (HACS on 2026.10 and older)
Domain: keenetic_router_pro
Source: github.com/cataseven/Keenetic-Router-Pro
Issues: Report an issue

Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation.

Screenshots From the README of cataseven/Keenetic-Router-Pro.

About

Keenetic Router Pro is an integration that connects Keenetic routers to Home Assistant over the local network. It tracks selected devices by pinging them every 3 seconds, with an optional fallback to the router's own connection state for devices on separate subnets. It adds router sensors such as CPU load, memory usage, uptime and WAN status, plus a reboot button and a firmware update entity. Mesh extenders get their own status, reboot and firmware information, and VPN profiles and WiFi networks can be switched on and off. Per-device bandwidth limits can be set with a number control and cleared with a button, and for routers with a USB cellular modem it reports data usage and limit alarms. Setup is done in the UI, with an optional challenge authentication setting for newer models.

Automatic summary of the README and code of cataseven/Keenetic-Router-Pro. Something wrong, or are you the maintainer and want your own text here? Get in touch

Supports

Works locally Talks to your devices on your own network. No vendor cloud in between.
Found by itself Home Assistant spots it on the network and offers to add it.
From the Marketplace Installed through the Marketplace, formerly HACS.
Actively maintained Its author released or pushed a change in the last six months.

Provides

Switches
Presence

Setting it up

Install it from the Marketplace and restart Home Assistant, then add it under Settings, Devices and services.

Keenetic Router Pro

Host
Port
Username
Password
Use SSL
Use Challenge Auth (NDW2/NDW4, required for newer models like Hero and for KeeneticOS 5.2)

Select Clients to Track

Clients to track
Use router link state as fallback when ping fails (enable for cross-subnet devices)

Re-authenticate Keenetic Router Pro

Username
Password

Reconfigure Keenetic Router Pro

Host
Port
Username
Password
Use SSL
Use Challenge Auth (NDW2/NDW4)

After setup

Clients to track
Presence ping interval (seconds)
Use router link state as fallback when ping fails (recommended for cross-subnet devices)

Texts from the code of cataseven/Keenetic-Router-Pro.

Entities

Binary sensorsData Limit Exceeded, Data Threshold Exceeded
ButtonsReboot Router, Clear Bandwidth Limit
NumbersBandwidth Limit
SelectsSIM Slot
SensorsCPU Load, Memory Usage, Uptime, WAN Status, Total Connected Clients, Connected Clients, Clients, Disconnected Clients, Extender Count, PPPoE Uptime, Active Connections, Firmware Version, and 20 more
UpdatesFirmware Update

Troubleshooting

DiagnosticsDownloads a diagnostics file to attach to a bug report.

From the README

An advanced Home Assistant integration for Keenetic routers. Provides mesh network management, VPN control, device tracking, traffic monitoring, firmware updates, per-device bandwidth limiting, 4G/LTE data-usage tracking, and more.
Real-time device status via ICMP Ping. You don't need to wait Keenetic's update time for device tracking. This integration pings the devices you selected every 3 seconds.
Selectable client list
Optional update interval
Automatic updates on IP address changes
Cross-subnet fallback (optional, off by default) — for devices on isolated sub-networks (guest VLANs, IoT subnets) that Home Assistant can't ping directly, an opt-in toggle uses the router's own…

From the README of cataseven/Keenetic-Router-Pro, Apache License 2.0. Shortened.