Teltonika for Home Assistant (built-in integration)

About

Teltonika is a built-in Home Assistant integration that reads cellular status from Teltonika devices over the local network. It adds sensors for the mobile band, connection type, operator and signal quality readings such as RSRP, RSRQ, RSSI and SINR. Home Assistant can discover a device on the network and offer to add it. Setup happens in the UI with the device hostname or IP address, a username and a password. An option controls whether the SSL certificate is verified over HTTPS, and it usually needs to be turned off because most of these devices use self-signed certificates.

Automatic summary of Home Assistant's source code. Something wrong? Get in touch

Supports

Works locally Talks to your devices on your own network. No vendor cloud in between.
Set up in the UI Add it in Settings, Devices and services. Nothing to download.
Found by itself Home Assistant spots it on the network and offers to add it.
Silver quality Home Assistant's own rating of its code and setup experience.
Updated with Home Assistant Ships and updates with every Home Assistant release.

Provides

Sensors

Setting it up

Home Assistant usually finds it on the network and offers to add it. It can also be added by hand under Settings, Devices and services.

Set up Teltonika device

HostThe hostname or IP address of your Teltonika device.
PasswordThe password to authenticate with the device.
UsernameThe username to authenticate with the device.
Verify SSL certificateWhether to validate the SSL certificate when using HTTPS. Most Teltonika devices use self-signed certificates, so you will need to disable this option unless you have installed a valid certificate on your device.