Homee for Home Assistant (built-in integration)

About

Homee is a built-in integration that connects Home Assistant to a homee smart home hub over the local network. It brings the devices paired with the hub into Home Assistant as alarms, binary sensors, buttons, climate controls, covers, events, fans, lights, locks, numbers, selects, sensors, sirens, switches and valves. Examples include leak, flood and overcurrent binary sensors, temperature and humidity sensors, link quality readings, and number settings such as display brightness and temperature offsets. Switches cover options like child lock and manual operation, and buttons trigger actions such as ventilate or open partially. Home Assistant can discover the hub on the network, add new devices on its own and remove devices that are gone. Setup is done in the UI with the hub address, username and password.

Automatic summary of Home Assistant's source code. Something wrong? Get in touch

Supports

Works locally Talks to your devices on your own network. No vendor cloud in between.
Set up in the UI Add it in Settings, Devices and services. Nothing to download.
Found by itself Home Assistant spots it on the network and offers to add it.
Adds new devices New devices show up without setting it up again.
Cleans up devices Devices that are gone are removed by themselves.
Change settings later Its connection settings can change without removing it.
Silver quality Home Assistant's own rating of its code and setup experience.
Updated with Home Assistant Ships and updates with every Home Assistant release.

Provides

Lights
Climate
Fans
Covers
Valves
Locks
Alarms
Switches
Sensors

Setting it up

Home Assistant usually finds it on the network and offers to add it. It can also be added by hand under Settings, Devices and services.

Configure homee

HostThe IP address of your homee.
PasswordThe password for your homee.
UsernameThe username for your homee.

Confirm the device

PasswordThe password for your homee.
UsernameThe username for your homee.

Also asked when signing in again.

Change the connection

HostThe IP address of your homee.

Texts from Home Assistant's source code, Apache License 2.0.

Entities

AlarmsStatus
Binary sensorsBlackout, Carbon dioxide, Flood, High temperature, Leak, Load, Low temperature, Malfunction, Maximum level, Minimum level, Motor blocked, Overcurrent, and 7 more
ButtonsAutomatic mode, Briefly open, Identification mode, Light, Open partially, Open permanently, Reset meter, Ventilate
EventsSwitch, Up/down remote
NumbersButton brightness (active), Button brightness (dimmed), Display brightness (active), Display brightness (dimmed), Down position, Down slat position, Down-movement duration, End position, External temperature offset, Floor temperature offset, Motion alarm delay, Window open sensibility, and 10 more
SelectsDisplayed temperature, Repeater mode
SensorsIlluminance, Dawn, Device temperature, Exhaust motor speed, External temperature, Floor temperature, Indoor humidity, Indoor temperature, Intake motor speed, Level, Link quality, Node state, and 14 more
SwitchesChild lock, Manual operation, Watchdog
ValvesValve position