energieleser for Home Assistant (built-in integration)

About

energieleser is a built-in integration that reads energy, gas, heat and water meter data from an energieleser device over the local network. It adds sensors for exported and imported energy, active power, total gas and gas flow rate, flow and return temperature, total volume, volume flow, pulse count, total water and water flow rate. Home Assistant can spot the device on the network and offer to add it, and setup is done in the UI by entering the device's local IP address or hostname. Connection settings can be changed later without removing the integration. A repair notice appears in Settings when the meter PIN is required, and a diagnostics file can be downloaded to attach to a bug report.

Automatic summary of Home Assistant's source code. Something wrong? Get in touch

Supports

Works locally Talks to your devices on your own network. No vendor cloud in between.
Set up in the UI Add it in Settings, Devices and services. Nothing to download.
Found by itself Home Assistant spots it on the network and offers to add it.
Change settings later Its connection settings can change without removing it.
Platinum quality Home Assistant's own rating of its code and setup experience.
Updated with Home Assistant Ships and updates with every Home Assistant release.

Provides

Sensors

Setting it up

Home Assistant usually finds it on the network and offers to add it. It can also be added by hand under Settings, Devices and services.

Add an energieleser device

HostLocal IP address or hostname of the device (e.g. 192.168.1.42).

Also asked when changing the connection.

Texts from Home Assistant's source code, Apache License 2.0.

Entities

SensorsExported energy, Imported energy, Gas flow rate, Total gas, Flow temperature, Return temperature, Total volume, Volume flow, Active power, Pulse count, Total water, Water flow rate, and 2 more