devolo Home Network for Home Assistant (built-in integration)

About

devolo Home Network is a built-in integration that connects devolo powerline and Wi-Fi devices to Home Assistant over the local network. It adds a binary sensor for the router connection, plus sensors for connected powerline devices, connected Wi-Fi clients, neighboring Wi-Fi networks, and the powerline uplink and downlink rates. Switches turn the guest Wi-Fi and the device LEDs on or off, and an image entity shows the guest Wi-Fi credentials as a QR code. Buttons can make the LED blink to identify a device, start powerline pairing, start WPS, or restart the device. Home Assistant can discover these devices on the network and offer to add them, and new devices appear without setting the integration up again. Setup is done in the interface and asks for the device password, and for the IP address if the device was not discovered.

Automatic summary of Home Assistant's source code. Something wrong? Get in touch

Supports

Works locally Talks to your devices on your own network. No vendor cloud in between.
Set up in the UI Add it in Settings, Devices and services. Nothing to download.
Found by itself Home Assistant spots it on the network and offers to add it.
Adds new devices New devices show up without setting it up again.
Silver quality Home Assistant's own rating of its code and setup experience.
Updated with Home Assistant Ships and updates with every Home Assistant release.

Provides

Switches
Sensors
Presence

Setting it up

Home Assistant usually finds it on the network and offers to add it. It can also be added by hand under Settings, Devices and services.

Connect

IP addressIP address of your devolo Home Network device. This can be found in the devolo Home Network app on the device dashboard.
PasswordPassword you protected the device with.

Discovered devolo Home Network device

PasswordPassword you protected the device with.

Also asked when signing in again.

Texts from Home Assistant's source code, Apache License 2.0.

Entities

Binary sensorsConnected to router
ButtonsIdentify device with a blinking LED, Start PLC pairing, Restart device, Start WPS
ImagesGuest Wi-Fi credentials as QR code
SensorsConnected PLC devices, Connected Wi-Fi clients, Neighboring Wi-Fi networks, PLC downlink PHY rate, PLC uplink PHY rate
SwitchesEnable guest Wi-Fi, Enable LEDs