ESPSomfy-RTS Enhanced for Home Assistant (Marketplace integration)

Installs: 94 sharing analytics
GitHub stars: 20
Connection: Works locally
Upkeep: Updated in the last 6 months
Version: v2.6.0, October 8, 2026
Category: Blinds and curtains
Kind: Marketplace integration
Brand: Somfy
Needs: Needs the Marketplace (HACS on 2026.10 and older)
Domain: espsomfy_rts_enhanced
Source: github.com/xkain/ESPSomfy-RTS-enhanced
Issues: Report an issue

Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation.

Screenshots From the README of xkain/ESPSomfy-RTS-enhanced.

About

ESPSomfy-RTS Enhanced is a fork of a Home Assistant integration that controls Somfy RTS shades and covers through an ESP32 device. It works locally with an ESP32 and CC1101 radio module running the ESPSomfy-RTS firmware, and Home Assistant can discover the device on the network. Shades appear as cover entities with open, close, stop, position and tilt control, and the position stays in sync when a physical Somfy remote or the ESP32 web interface moves them. Further actions send raw RTS or step commands, set sunlight and wind status, and correct the stored position without running the motor. The device itself is exposed through sensors for Wi-Fi and connection details, restart and backup buttons, and an update entity for the ESP32 firmware.

Automatic summary of the README and code of xkain/ESPSomfy-RTS-enhanced. Something wrong, or are you the maintainer and want your own text here? Get in touch

Supports

Works locally Talks to your devices on your own network. No vendor cloud in between.
Found by itself Home Assistant spots it on the network and offers to add it.
From the Marketplace Installed through the Marketplace, formerly HACS.
Actively maintained Its author released or pushed a change in the last six months.

Provides

Covers
Switches
Sensors

Setting it up

Install it from the Marketplace and restart Home Assistant, then add it under Settings, Devices and services.

Configure ESPSomfy-RTS

Host address for the ESPSomfy-RTS device
Username
Password
PIN Code

Also asked when confirming the device, at the configure espsomfy-rts step and signing in again.

After setup

Host address for the ESPSomfy-RTS device
Username
Password
PIN Code

Texts from the code of xkain/ESPSomfy-RTS-enhanced.

Entities

Binary sensorsSunlight, Wind
ButtonsRestart, Backup
SensorsHostname, Chip type, Hardware Profile, Last restart, Started, Network connected since, Connection, Wi-Fi signal strength, Wi-Fi SSID, Wi-Fi channel, Connection speed, Full Duplex, and 4 more
SwitchesSun sensor, Dry contact
UpdatesESP32 Firmware

Actions

Open shadeOpens the shade completely
Close shadeCloses the shade completely
Stop shadeStops the shade at its current position
Set positionSets the shade opening position in percentageFields: Position
Open tiltTilts the slats to the open position
Close tiltTilts the slats to the closed position
Set tilt positionSets the tilt position of the slats in percentageFields: Tilt position
Force current positionSets the current position in HA without operating the motorFields: Position
Force current tilt positionSets the current tilt position in HA without operating the motorFields: Tilt position
Set sunlight statusSends a command to the motor indicating whether it is sunny or notFields: Sunny
Set wind statusSends a command to the motor indicating whether it is windy or notFields: Windy
Send RTS commandSends any raw command using the RTS protocolFields: Command, Repeat
Send step commandSends a step-by-step movement commandFields: Direction, Step size, Repeat
RestartTriggers a restart of the ESPSomfy-RTS device
BackupTriggers a backup of the ESPSomfy-RTS device configuration

From the README

A custom Home Assistant integration (Fork) to precisely control and monitor your equipment (roller shutters, shades, garage doors, gates) using the RTS 433 MHz protocol.
Full Control: Open, close, and set intermediate positions (percentages) directly from Home Assistant.
State Synchronization: The integration tracks the real-time position of the cover, even if it is operated by a physical Somfy Telis remote or via the ESP32 web interface.
Simplified Updates: You will receive a notification whenever a new version of the integration is available. Additionally, since v2.2.1 of the ESPSomfy RTS firmware, a dedicated update entity allows…
Automations: All shades are exposed as standard cover entities, ready to be added to your dashboards and used in automations via native services.

From the README of xkain/ESPSomfy-RTS-enhanced, The Unlicense. Shortened.