Direct naar de inhoud
Downloaden

Automatiseringsblauwdruk

Inovelli Blue Series Bulk Configuration (Z2M)

door gbosky

Blauwdruk importeren

Onafhankelijk overzicht, gemaakt door de ontwikkelaar van Vulpo. Niet gelieerd aan Home Assistant of de Open Home Foundation. Blauwdrukken blijven van hun makers: elke pagina linkt naar de eigen post en het bestand van de maker.

Screenshots van gbosky.

Nog geen screenshotsBen jij gbosky? Voeg je screenshots toe en ze verschijnen hier, bovenaan de pagina.

Wat deze blauwdruk doet

Stuurt gekozen parameterinstellingen via Zigbee2MQTT naar een of meer Inovelli Blue Series-apparaten. Je kiest doelapparaten, gebieden of labels, schakelt daarna waarden in en stelt ze in voor dimmen, ramp-snelheden, ledbalk, dubbeltik, stroomrapportage, mmWave en ventilator- of kapopties.

Geschreven door vulpo.app op basis van het blauwdrukbestand van gbosky. Klopt er iets niet, of ben jij de maker? Neem contact op

Instellen vanaf je iPhone De automatiseringseditor van Vulpo maakt van de 17 secties van deze blauwdruk een formulier, en toont elke uitvoering terwijl die gebeurt.

Vulpo downloadenAutomatiseringen in Vulpo

Werkt met

  • MQTTmqtt
  • Blijvende meldingpersistent_notification
  • Systeemlogboeksystem_log

Wat je kiest bij het importeren.

  • Targeted Inovelli Devices, Areas, or Labels
  • Automation Trigger (Optional)Optioneel
  • Notification TitleOptioneel
  • MQTT TopicOptioneel

## ⚡ Dimming & Ramp Rates

  • Enable P1: Dimming Speed Up (Remote)Optioneel
  • Value P1: Dimming Speed Up (Remote)Optioneel
  • Enable P2: Dimming Speed Up (Local)Optioneel
  • Value P2: Dimming Speed Up (Local)Optioneel
  • Enable P3: Ramp Rate Off to On (Remote)Optioneel
  • Value P3: Ramp Rate Off to On (Remote)Optioneel
  • Enable P4: Ramp Rate Off to On (Local)Optioneel
  • Value P4: Ramp Rate Off to On (Local)Optioneel
  • Enable P5: Dimming Speed Down (Remote)Optioneel
  • Value P5: Dimming Speed Down (Remote)Optioneel
  • Enable P6: Dimming Speed Down (Local)Optioneel
  • Value P6: Dimming Speed Down (Local)Optioneel
  • Enable P7: Ramp Rate On to Off (Remote)Optioneel
  • Value P7: Ramp Rate On to Off (Remote)Optioneel
  • Enable P8: Ramp Rate On to Off (Local)Optioneel
  • Value P8: Ramp Rate On to Off (Local)Optioneel

## 🔆 Brightness Levels / Power Restored Level

  • Enable P9: Minimum Dim LevelOptioneel
  • Value: P9 Minimum Dim LevelOptioneel
  • Enable P10: Maximum Dim LevelOptioneel
  • Value: P10 Maximum Dim LevelOptioneel
  • Enable P13: Default Level (Local)Optioneel
  • Value: P13 Default Level (Local)Optioneel
  • Enable P14: Default Level (Remote)Optioneel
  • Value: P14 Default Level (Remote)Optioneel
  • Enable P15: Level After Power RestoredOptioneel
  • Value: P15 Level After Power RestoredOptioneel

## ⚙️ Basic Switch Settings

  • Enable P11: Invert SwitchOptioneel
  • Value: P11 Invert SwitchOptioneel
  • Enable P12: Auto-Off TimerOptioneel
  • Value: P12 Auto-Off TimerOptioneel
  • Enable P22: Switch TypeOptioneel
  • Value: P22 Switch TypeOptioneel
  • Value: P22 Switch TypeOptioneel
  • Enable P25: Higher Output (Non-Neutral)Optioneel
  • Value: P25 Higher Output (Non-Neutral)Optioneel
  • Enable P50: Button Press DelayOptioneel
  • Value: P50 Button Press DelayOptioneel
  • Enable P52: Smart Bulb ModeOptioneel
  • Value: P52 Smart Bulb ModeOptioneel
  • Value: P52 Smart Fan ModeOptioneel
  • Enable P258: Switch ModeOptioneel
  • Value: P258 Switch ModeOptioneel
  • Value: P258 Fan ModeOptioneel
  • Enable P259: One LED ModeOptioneel
  • Value: P259 One LED ModeOptioneel

## 👆 Double Tap Settings

  • Enable P53: 2x Tap Up FeatureOptioneel
  • Value: P53 Enable 2x Tap UpOptioneel
  • Enable P54: 2x Tap Down FeatureOptioneel
  • Value: P54 Enable 2x Tap DownOptioneel
  • Enable P55: 2x Tap Up LevelOptioneel
  • Value: P55 2x Tap Up LevelOptioneel
  • Enable P56: 2x Tap Down LevelOptioneel
  • Value: P56 2x Tap Down LevelOptioneel
  • Enable P262: Clear Notification via 2x TapOptioneel
  • Value: P262 Clear Notification via 2x TapOptioneel

## ⚡ Power & Energy Reporting

  • Enable P18: Active Power ReportsOptioneel
  • Value: P18 Active Power ReportsOptioneel
  • Enable P19: Periodic Power & Energy ReportsOptioneel
  • Value: P19 Periodic Power & Energy ReportsOptioneel
  • Enable P20: Active Energy ReportsOptioneel
  • Value: P20 Active Energy ReportsOptioneel

## 🌈 Global LED Bar Settings

  • Enable P17: LED Indicator TimeoutOptioneel
  • Value: P17 LED Indicator TimeoutOptioneel
  • Enable P95: Global LED Color (On)Optioneel
  • Value: P95 Global LED Color (On)Optioneel
  • Enable P96: Global LED Color (Off)Optioneel
  • Value: P96 Global LED Color (Off)Optioneel
  • Enable P97: Global LED Intensity (On)Optioneel
  • Value: P97 Global LED Intensity (On)Optioneel
  • Enable P98: Global LED Intensity (Off)Optioneel
  • Value: P98 Global LED Intensity (Off)Optioneel
  • Enable P100: LED Bar ScalingOptioneel
  • Value: P100 LED Bar ScalingOptioneel

## 💡 LED Segment 1 (Bottom)

  • Enable P60: LED 1 Color (On)Optioneel
  • Value: P60 LED 1 Color (On)Optioneel
  • Enable P61: LED 1 Color (Off)Optioneel
  • Value: P61 LED 1 Color (Off)Optioneel
  • Enable P62: LED 1 Intensity (On)Optioneel
  • Value: P62 LED 1 Intensity (On)Optioneel
  • Enable P63: LED 1 Intensity (Off)Optioneel
  • Value: P63 LED 1 Intensity (Off)Optioneel

## 💡 LED Segment 2

  • Enable P65: LED 2 Color (On)Optioneel
  • Value: P65 LED 2 Color (On)Optioneel
  • Enable P66: LED 2 Color (Off)Optioneel
  • Value: P66 LED 2 Color (Off)Optioneel
  • Enable P67: LED 2 Intensity (On)Optioneel
  • Value: P67 LED 2 Intensity (On)Optioneel
  • Enable P68: LED 2 Intensity (Off)Optioneel
  • Value: P68 LED 2 Intensity (Off)Optioneel

## 💡 LED Segment 3

  • Enable P70: LED 3 Color (On)Optioneel
  • Value: P70 LED 3 Color (On)Optioneel
  • Enable P71: LED 3 Color (Off)Optioneel
  • Value: P71 LED 3 Color (Off)Optioneel
  • Enable P72: LED 3 Intensity (On)Optioneel
  • Value: P72 LED 3 Intensity (On)Optioneel
  • Enable P73: LED 3 Intensity (Off)Optioneel
  • Value: P73 LED 3 Intensity (Off)Optioneel

## 💡 LED Segment 4

  • Enable P75: LED 4 Color (On)Optioneel
  • Value: P75 LED 4 Color (On)Optioneel
  • Enable P76: LED 4 Color (Off)Optioneel
  • Value: P76 LED 4 Color (Off)Optioneel
  • Enable P77: LED 4 Intensity (On)Optioneel
  • Value: P77 LED 4 Intensity (On)Optioneel
  • Enable P78: LED 4 Intensity (Off)Optioneel
  • Value: P78 LED 4 Intensity (Off)Optioneel

## 💡 LED Segment 5

  • Enable P80: LED 5 Color (On)Optioneel
  • Value: P80 LED 5 Color (On)Optioneel
  • Enable P81: LED 5 Color (Off)Optioneel
  • Value: P81 LED 5 Color (Off)Optioneel
  • Enable P82: LED 5 Intensity (On)Optioneel
  • Value: P82 LED 5 Intensity (On)Optioneel
  • Enable P83: LED 5 Intensity (Off)Optioneel
  • Value: P83 LED 5 Intensity (Off)Optioneel

## 💡 LED Segment 6

  • Enable P85: LED 6 Color (On)Optioneel
  • Value: P85 LED 6 Color (On)Optioneel
  • Enable P86: LED 6 Color (Off)Optioneel
  • Value: P86 LED 6 Color (Off)Optioneel
  • Enable P87: LED 6 Intensity (On)Optioneel
  • Value: P87 LED 6 Intensity (On)Optioneel
  • Enable P88: LED 6 Intensity (Off)Optioneel
  • Value: P88 LED 6 Intensity (Off)Optioneel

## 💡 LED Segment 7 (Top)

  • Enable P90: LED 7 Color (On)Optioneel
  • Value: P90 LED 7 Color (On)Optioneel
  • Enable P91: LED 7 Color (Off)Optioneel
  • Value: P91 LED 7 Color (Off)Optioneel
  • Enable P92: LED 7 Intensity (On)Optioneel
  • Value: P92 LED 7 Intensity (On)Optioneel
  • Enable P93: LED 7 Intensity (Off)Optioneel
  • Value: P93 LED 7 Intensity (Off)Optioneel

## 🔧 Advanced Features

  • Enable P120: Single-Tap Behavior (Fan Mode)Optioneel
  • Value: P120 Single-Tap BehaviorOptioneel
  • Enable P121: Fan Timer ModeOptioneel
  • Value: P121 Fan Timer ModeOptioneel
  • Enable P123: Aux Switch Unique ScenesOptioneel
  • Value: P123 Aux Switch Unique ScenesOptioneel
  • Enable P125: Binding Default LevelOptioneel
  • Value: P125 Binding Default LevelOptioneel
  • Enable P130: Fan Control ModeOptioneel
  • Value: P130 Fan Control ModeOptioneel
  • Enable P131: Fan Low LevelOptioneel
  • Value: P131 Fan Low LevelOptioneel
  • Enable P132: Fan Medium LevelOptioneel
  • Value: P132 Fan Medium LevelOptioneel
  • Enable P133: Fan High LevelOptioneel
  • Value: P133 Fan High LevelOptioneel
  • Enable P134: Fan LED ColorOptioneel
  • Value: P134 Fan LED ColorOptioneel
  • Enable P256: Local Protection (Child Lock)Optioneel
  • Value: P256 Local ProtectionOptioneel
  • Enable P260: Firmware Update IndicatorOptioneel
  • Value: P260 Firmware Update IndicatorOptioneel
  • Enable P261: Relay Click Sound (2-in-1 Dimmer Only)Optioneel
  • Value: P261 Relay Click SoundOptioneel

## 📡 mmWave Sensor Settings (mmWave/VZM32-SN model only)

  • Enable P101: mmWave Minimum Height (Floor Boundary)Optioneel
  • Value: P101 Minimum HeightOptioneel
  • Enable P102: mmWave Maximum Height (Ceiling Boundary)Optioneel
  • Value: P102 Maximum HeightOptioneel
  • Enable P103: mmWave Minimum Width (Left Boundary)Optioneel
  • Value: P103 Minimum WidthOptioneel
  • Enable P104: mmWave Maximum Width (Right Boundary)Optioneel
  • Value: P104 Maximum WidthOptioneel
  • Enable P105: mmWave Minimum Depth (Closest Detection)Optioneel
  • Value: P105 Minimum DepthOptioneel
  • Enable P106: mmWave Maximum Depth (Farthest Detection)Optioneel
  • Value: P106 Maximum DepthOptioneel
  • Enable P110: Light On Presence BehaviorOptioneel
  • Value: P110 Light On Presence BehaviorOptioneel
  • Enable P112: mmWave Detection SensitivityOptioneel
  • Value: P112 Detection SensitivityOptioneel
  • Enable P113: mmWave Detection DelayOptioneel
  • Value: P113 Detection DelayOptioneel
  • Enable P114: mmWave Time OutOptioneel
  • Value: P114 Time OutOptioneel
  • Enable PXXX: mmWave Stay LifeOptioneel
  • Value: PXXX mmWave Stay LifeOptioneel
  • Enable PXXX: mmWave Target Info ReportOptioneel
  • Value: PXXX mmWave Target Info ReportOptioneel
  • Enable P117: Room Size PresetOptioneel
  • Value: P117 Room Size PresetOptioneel
  • Enable PXXX: OTA Image Type for mmWaveOptioneel
  • Value: PXXX OTA Image TypeOptioneel

## 💡 Canopy Module **LIGHT** Settings (Fan Canopy Module/VZM36 model only)

  • Enable P1: Light Dimming Speed UpOptioneel
  • Value: P1 Light Dimming Speed UpOptioneel
  • Enable P3: Light Ramp Rate Off to OnOptioneel
  • Value: P3 Light Ramp Rate Off to OnOptioneel
  • Enable P5: Light Dimming Speed DownOptioneel
  • Value: P5 Light Dimming Speed DownOptioneel
  • Enable P7: Light Ramp Rate On to OffOptioneel
  • Value: P7 Light Ramp Rate On to OffOptioneel
  • Enable P9: Light Minimum Dim LevelOptioneel
  • Value: P9 Light Minimum Dim LevelOptioneel
  • Enable P10: Light Maximum Dim LevelOptioneel
  • Value: P10 Light Maximum Dim LevelOptioneel
  • Enable P12: Light Auto-Off TimerOptioneel
  • Value: P12 Light Auto-Off TimerOptioneel
  • Enable P14: Light Default Dim LevelOptioneel
  • Value: P14 Light Default Dim LevelOptioneel
  • Enable P15: Light Level After Power RestoredOptioneel
  • Value: P15 Light Level After Power RestoredOptioneel
  • Enable P25: Light Higher Output (Non-Neutral)Optioneel
  • Value: P25 Light Higher Output (Non-Neutral)Optioneel
  • Enable P26: Dimming ModeOptioneel
  • Value: P26 Light Dimming ModeOptioneel
  • Enable P34: Quick Start Time LightOptioneel
  • Value: P34 Quick Start LightOptioneel
  • Enable P35: Quick Start Light LevelOptioneel
  • Value: P35 Quick Start Light LevelOptioneel
  • Enable P52: Light Smart Bulb ModeOptioneel
  • Value: P52 Light Smart Bulb ModeOptioneel
  • Enable P95: Light LED ColorOptioneel
  • Value: P95 Light LED ColorOptioneel
  • Enable P97: Light LED IntensityOptioneel
  • Value: P97 Light LED IntensityOptioneel
  • Enable P258: Light Switch ModeOptioneel
  • Value: P258 Light Switch ModeOptioneel

## 💨 Canopy Module **FAN** Settings (Fan Canopy Module/VZM36 model only)

  • Enable P1: Fan Speed UpOptioneel
  • Value: P1 Fan Speed UpOptioneel
  • Enable P3: Fan Ramp Rate Off to OnOptioneel
  • Value: P3 Fan Ramp Rate Off to OnOptioneel
  • Enable P5: Fan Speed DownOptioneel
  • Value: P5 Fan Speed DownOptioneel
  • Enable P7: Fan Ramp Rate On to OffOptioneel
  • Value: P7 Fan Ramp Rate On to OffOptioneel
  • Enable P9: Fan Minimum Speed LevelOptioneel
  • Value: P9 Fan Minimum Speed LevelOptioneel
  • Enable P10: Fan Maximum Speed LevelOptioneel
  • Value: P10 Fan Maximum Speed LevelOptioneel
  • Enable P12: Fan Auto-Off TimerOptioneel
  • Value: P12 Fan Auto-Off TimerOptioneel
  • Enable P14: Fan Default Speed LevelOptioneel
  • Value: P14 Fan Default Speed LevelOptioneel
  • Enable P15: Fan Speed Level After Power RestoredOptioneel
  • Value: P15 Fan Speed Level After Power RestoredOptioneel
  • Enable P34: Quick Start Time FanOptioneel
  • Value: P34 Quick Start FanOptioneel
  • Enable P52: Fan Remote Control ModeOptioneel
  • Value: P52 Fan Remote Control ModeOptioneel
  • Enable P258: Fan Switch ModeOptioneel
  • Value: P258 Fan Switch ModeOptioneel

Informatie

Weergaven op het forum
843
Likes
13
Versie
1.2
Gecontroleerd
Importeert foutloos
Categorie
Verlichting
Bestand
github.com/gbosky/HA-blueprints/blob/main/inovelli_blue_bulk_config_z2m.yaml
Discussie
6 reacties op het forum

Onafhankelijk overzicht, gemaakt door de ontwikkelaar van Vulpo. Niet gelieerd aan Home Assistant of de Open Home Foundation. Blauwdrukken blijven van hun makers: elke pagina linkt naar de eigen post en het bestand van de maker. Over deze cijfers

Bijgewerkt

Op zoek naar een app? De beste Home Assistant-apps voor iPhone, per behoefte.