Screenshots von Herr.Vorragend.
Noch keine ScreenshotsBist du Herr.Vorragend? Füge deine Screenshots hinzu, dann erscheinen sie hier, ganz oben auf der Seite.
Was dieser Blueprint macht
Öffnet, schließt, lüftet und beschattet eine Abdeckung anhand von Zeitplänen, Helligkeit, Sonnenhöhe, Wetter und Temperatur. Du wählst die Abdeckung aus und legst Positionen, Zeiten, Sensoren, die Behandlung von Bewohnern und manuellen Eingriffen, Erzwingen-Optionen und zusätzliche Aktionen fest.
Von vulpo.app aus der Blueprint-Datei von Herr.Vorragend geschrieben. Stimmt etwas nicht, oder ist es dein Blueprint? Melde dich
Vom iPhone aus einrichten Der Automationseditor von Vulpo macht aus den 16 Abschnitten dieses Blueprints ein Formular und zeigt jede Ausführung, sobald sie passiert.
Funktioniert mit
- Binärsensor
binary_sensor - Kalender
calendar - Abdeckung
cover - Boolesche Eingabe
input_boolean - Zahleneingabe
input_number - Auswahleingabe
input_select - Texteingabe
input_text - Logbuch
logbook - Zeitplan
schedule - Auswahl
select - Sensor
sensor 
Sunsun- Schalter
switch - Systemprotokoll
system_log - Wetter
weather
Was du auswählst, wenn du den Blueprint importierst.
- 🪟 Cover
- 🔤 Cover Status HelperOptional
Automation Options
- 👉 What should CCA control?Optional
- ⏲️ Time Control TypeOptional
- 🔀 Condition Logic: Brightness & Sun ElevationOptional
- ⚙️ Behavior CustomizationOptional
- 🔄 Catch up on what a restart or an outage swallowedOptional
- 🎚️ Only run this automation while this switch is onOptional
- 🎚️ ... and it counts as on while it shows this valueOptional
Cover Position Settings
- 📍 Position Source TypeOptional
- 📍 Custom Position SensorOptional
- 🎯 Cover TypeOptional
- 🔼 Open PositionOptional
- 🔻 Close PositionOptional
- 💨 Ventilate PositionOptional
- 💨 Full Ventilation PositionOptional
- 🥵 Sun Shading PositionOptional
- 🥵 Alternate Sun Shading PositionOptional
- 🥵 Alternate Sun Shading Position TriggerOptional
- 〰️ Position ToleranceOptional
- ⏲️ Cover Drive TimeOptional
Cover Tilt Position Settings
- 🔄 Tilt Wait ModeOptional
- 🔄 Tilt Wait TimeoutOptional
- 🕛 Default Tilt DelayOptional
- 📐 Tilt Position FeatureOptional
- 📐 Tilt Reposition FeatureOptional
- 🔼 Open Tilt PositionOptional
- 🔻 Close Tilt PositionOptional
- 💨 Ventilate Tilt PositionOptional
- 〰️ Tilt Position ToleranceOptional
- 🥵 Sun Shading Tilt PositionOptional
- 🥵 Sun Shading Tilt Position 1Optional
- 🥵 Sun Shading Tilt Elevation 1Optional
- 🥵 Sun Shading Tilt Position 2Optional
- 🥵 Sun Shading Tilt Elevation 2Optional
- 🥵 Sun Shading Tilt Position 3Optional
- 🥵 Sun Shading Tilt Elevation 3Optional
Time Control Configuration
- 🔼 Time For Drive Up - Early On WorkdaysOptional
- 🔼 Time For Drive Up - Early On Non-WorkdaysOptional
- 🔼 Time For Drive Up - Late On WorkdaysOptional
- 🔼 Time For Drive Up - Late On Non-WorkdaysOptional
- 🔻 Time For Drive Down - Early On WorkdaysOptional
- 🔻 Time For Drive Down - Early On Non-WorkdaysOptional
- 🔻 Time For Drive Down - Late On WorkdaysOptional
- 🔻 Time For Drive Down - Late On Non-WorkdaysOptional
- 💼 Sensor For Workday TodayOptional
- 💼 Sensor For Workday Tomorrow (only for closing)Optional
- 📅 Calendar EntityOptional
- 📂 Open Event TitleOptional
- 📁 Close Event TitleOptional
Brightness Configuration
- 🔅 Default Brightness SensorOptional
- 🔅 Brightness Time DurationOptional
- 🔅 Brightness Value For Opening The CoverOptional
- 🔅 Brightness Value For Closing The CoverOptional
- 🔅 Brightness Hysteresis ValueOptional
Sun Elevation Settings
- ☀️ Sun SensorOptional
- ☀️ Sun Time DurationOptional
- ☀️ Sun Elevation ModeOptional
- ☀️ Sun Elevation Value For Opening The CoverOptional
- ☀️ Sun Elevation Value For Closing The CoverOptional
- ☀️ Sun Elevation Up Sensor (Dynamic/Hybrid - Optional)Optional
- ☀️ Sun Elevation Down Sensor (Dynamic/Hybrid - Optional)Optional
Contact Sensors for Ventilation
- 🚪 Contact Sensor For Open Window (Full Ventilation)Optional
- 💨 Contact Sensor For Tilted Window (Partial Ventilation)Optional
- 💨 Lockout protection for window tiltedOptional
- 💨 Ventilation ConfigurationOptional
- 🕛 Contact Trigger DelayOptional
- 🕛 Contact Sensor Status DelayOptional
Sun Shading / Sun Protection
- 🌞 Shading START - Required Conditions (AND)Optional
- 🌞 Shading START - Optional Conditions (OR)Optional
- 🌥️ Shading END - Required Conditions (AND)Optional
- 🌥️ Shading END - Optional Conditions (OR)Optional
- 🧩 Sun Shading - Custom Condition SensorOptional
- 📐 Sun Shading - Azimuth Start ValueOptional
- 📐 Sun Shading - Azimuth End ValueOptional
- 📈 Sun Shading - Elevation Minimum ValueOptional
- 📈 Sun Shading - Elevation Maximum ValueOptional
- 🔆 Sun Shading - Brightness SensorOptional
- 🔆 Sun Shading - Brightness Start ValueOptional
- 🔆 Sun Shading - Brightness End ValueOptional
- 🔆 Sun Shading - Brightness HysteresisOptional
- 1️⃣ Sun Shading - Temperature Sensor 1 (eg. indoor)Optional
- 1️⃣ Sun Shading - Temperature Sensor 1 Minimum ValueOptional
- 1️⃣ Sun Shading - Temperature Sensor 1 Hysteresis ValueOptional
- 2️⃣ Sun Shading - Temperature Sensor 2 (eg. outdoor)Optional
- 2️⃣ Sun Shading - Temperature Sensor 2 Minimum ValueOptional
- 2️⃣ Sun Shading - Temperature Sensor 2 Hysteresis ValueOptional
- 📊 Sun Shading - Forecast Weather EntityOptional
- 📊 Sun Shading - Forecast SourceOptional
- 📊 Sun Shading - Direct Temperature Sensor (Alternative)Optional
- 📊 Sun Shading - Forecast Temperature ValueOptional
- 📊 Sun Shading - Forecast Temperature HysteresisOptional
- 🌦️ Sun Shading - Weather ConditionsOptional
- 🥵 Sun Shading - ConfigurationOptional
- 🥵 Sun Shading - Independent Temperature ThresholdOptional
- 🥵 Sun Shading - Start Waiting TimeOptional
- 🥵 Sun Shading - Maximum duration for shading start retry loopOptional
- 🥵 Sun Shading - End Waiting TimeOptional
- 🥵 Sun Shading - Maximum duration for shading end retry loopOptional
- 🥵 End Sun Shading - Immediately When Out Of RangeOptional
Resident Settings
- 🛌 Resident SensorOptional
- 🛌 Resident ConfigurationOptional
Manual Override
- 🖐️ Automatic movements blocked during Manual OverrideOptional
- 🖐️ Manual movement inside the schedule window counts as the scheduled eventOptional
- 🗑️ Reset manual overrideOptional
- 🔙 Return to Target State After Manual Override ResetOptional
- 🗑️ Time to reset manual overrideOptional
- 🗑️ Number of minutes until reset manual overrideOptional
- 🗑️ Position for reset manual overrideOptional
- 🗑️ Dwell time at reset position (minutes)Optional
Delay Settings
- 🕛 Fixed Drive DelayOptional
- 🕛 Random Drive DelayOptional
Additional Conditions
- ❓ Additional Condition for the entire automationOptional
- 🔼 Additional Condition For Opening The CoverOptional
- 🔻 Additional Condition For Closing The CoverOptional
- 💨 Additional Condition For Activating VentilationOptional
- 💨 Additional Condition For Disabling VentilationOptional
- 🥵 Additional Condition When Activating Sun ShadingOptional
- 🥵 Additional Condition For Sun Shading TiltOptional
- 🥵 Additional Condition When Deactivating Sun ShadingOptional
Force Features
- ⏸️ Force Pause (Suspend Automatic Actions)Optional
- 🔼 Force Immediate Opening via EntityOptional
- 🔻 Force Immediate Closing via EntityOptional
- 💨 Force Immediate Ventilation via EntityOptional
- 🥵 Force Activation Sun Shading via EntityOptional
- 🔙 Return to Target State After Force DisableOptional
Additional Actions
- 🔼 Additional Actions Before Opening The CoverOptional
- 🔼 Additional Actions After Opening The CoverOptional
- 🔻 Additional Actions Before Closing The CoverOptional
- 🔻 Additional Actions After Closing The CoverOptional
- 💨 Additional Actions Before Ventilating The CoverOptional
- 💨 Additional Actions After Ventilating The CoverOptional
- 🥵 Additional Actions Before Activating Sun ShadingOptional
- 🥵 Additional Actions After Activating Sun ShadingOptional
- 🥵 Additional Actions Before Disabling Sun ShadingOptional
- 🥵 Additional Actions After Disabling Sun ShadingOptional
- 🖐️ Additional Actions After Manual ChangeOptional
- 🗑️ Additional Actions After Override ResetOptional
Configuration Check
- ✔️ Check ConfigurationOptional
- ✔️ Check Configuration - Debug levelOptional
Logging
- 📓 Enable Logbook entriesOptional
- 🪟 Log decisions on the coverOptional
- 📜 Number of stored tracesOptional
Informationen
- Aufrufe im Forum
- 249.228
- Likes
- 787
- Version
- 2026.10.23
- Geprüft
- Importiert fehlerfrei
- Braucht Home Assistant
- 2025.4.0 oder neuer
- Kategorie
- Rollläden und Jalousien
- Datei
- github.com/
hvorragend/ ha-blueprints/ blob/ main/ blueprints/ automation/ cover_control_automation.yaml - Diskussion
- 2.853 Antworten im Forum