--- title: "ESPSomfy-RTS Enhanced" description: "ESPSomfy-RTS Enhanced is a Marketplace integration for Home Assistant. It has 94 installs sharing analytics, works locally and was last updated October 8, 2026." canonical: "https://vulpo.app/integrations/marketplace/xkain-espsomfy-rts-enhanced" url: "https://vulpo.app/integrations/marketplace/xkain-espsomfy-rts-enhanced.md" last-updated: "2026-10-27" version: "1.4" --- # ESPSomfy-RTS Enhanced > ESPSomfy-RTS Enhanced is a Marketplace integration for Home Assistant. It has 94 installs sharing analytics, works locally and was last updated October 8, 2026. ESPSomfy-RTS Enhanced is a fork of a Home Assistant integration that controls Somfy RTS shades and covers through an ESP32 device. It works locally with an ESP32 and CC1101 radio module running the ESPSomfy-RTS firmware, and Home Assistant can discover the device on the network. Shades appear as cover entities with open, close, stop, position and tilt control, and the position stays in sync when a physical Somfy remote or the ESP32 web interface moves them. Further actions send raw RTS or step commands, set sunlight and wind status, and correct the stored position without running the motor. The device itself is exposed through sensors for Wi-Fi and connection details, restart and backup buttons, and an update entity for the ESP32 firmware. Automatic summary of the README and code of xkain/ESPSomfy-RTS-enhanced. Something wrong, or are you the maintainer and want your own text here? [Get in touch](https://vulpo.app/contact) [Open in My Home Assistant](https://my.home-assistant.io/redirect/hacs_repository/?owner=xkain&repository=ESPSomfy-RTS-enhanced&category=integration) On Home Assistant 2026.11 or newer? [Open it in the Marketplace](https://my.home-assistant.io/redirect/marketplace_repository/?owner=xkain&repository=ESPSomfy-RTS-enhanced&category=integration) ## Supports - **Works locally**: Talks to your devices on your own network. No vendor cloud in between. - **Found by itself**: Home Assistant spots it on the network and offers to add it. - **From the Marketplace**: Installed through the Marketplace, formerly HACS. - **Actively maintained**: Its author released or pushed a change in the last six months. ## Setting it up Install it from the Marketplace and restart Home Assistant, then add it under Settings, Devices and services. ### Configure ESPSomfy-RTS - **Host address for the ESPSomfy-RTS device** - **Username** - **Password** - **PIN Code** Also asked when confirming the device, at the configure espsomfy-rts step and signing in again. ### After setup - **Host address for the ESPSomfy-RTS device** - **Username** - **Password** - **PIN Code** Texts from the code of [xkain/ESPSomfy-RTS-enhanced](https://github.com/xkain/ESPSomfy-RTS-enhanced). ## Entities - **Binary sensors**: Sunlight, Wind - **Buttons**: Restart, Backup - **Sensors**: Hostname, Chip type, Hardware Profile, Last restart, Started, Network connected since, Connection, Wi-Fi signal strength, Wi-Fi SSID, Wi-Fi channel, Connection speed, Full Duplex, and 4 more - **Switches**: Sun sensor, Dry contact - **Updates**: ESP32 Firmware ## Actions - **Open shade**: Opens the shade completely - **Close shade**: Closes the shade completely - **Stop shade**: Stops the shade at its current position - **Set position**: Sets the shade opening position in percentage Fields: Position - **Open tilt**: Tilts the slats to the open position - **Close tilt**: Tilts the slats to the closed position - **Set tilt position**: Sets the tilt position of the slats in percentage Fields: Tilt position - **Force current position**: Sets the current position in HA without operating the motor Fields: Position - **Force current tilt position**: Sets the current tilt position in HA without operating the motor Fields: Tilt position - **Set sunlight status**: Sends a command to the motor indicating whether it is sunny or not Fields: Sunny - **Set wind status**: Sends a command to the motor indicating whether it is windy or not Fields: Windy - **Send RTS command**: Sends any raw command using the RTS protocol Fields: Command, Repeat - **Send step command**: Sends a step-by-step movement command Fields: Direction, Step size, Repeat - **Restart**: Triggers a restart of the ESPSomfy-RTS device - **Backup**: Triggers a backup of the ESPSomfy-RTS device configuration ## From the README > A custom Home Assistant integration (Fork) to precisely control and monitor your equipment (roller shutters, shades, garage doors, gates) using the RTS 433 MHz protocol. > > - Full Control: Open, close, and set intermediate positions (percentages) directly from Home Assistant. > - State Synchronization: The integration tracks the real-time position of the cover, even if it is operated by a physical Somfy Telis remote or via the ESP32 web interface. > - Simplified Updates: You will receive a notification whenever a new version of the integration is available. Additionally, since v2.2.1 of the ESPSomfy RTS firmware, a dedicated update entity allows… > - Automations: All shades are exposed as standard cover entities, ready to be added to your dashboards and used in automations via native services. From the README of [xkain/ESPSomfy-RTS-enhanced](https://github.com/xkain/ESPSomfy-RTS-enhanced#readme), [The Unlicense](https://spdx.org/licenses/Unlicense.html). Shortened. ## At a glance - Kind: Marketplace integration - Category: [Blinds and curtains](https://vulpo.app/integrations/category/blinds-and-curtains.md) - Brand: [Somfy](https://vulpo.app/integrations/somfy.md) - Number: 94 installs sharing analytics; 20 GitHub stars - Connection: Works locally - Upkeep: Updated in the last 6 months - Needs: Needs the Marketplace (HACS on 2026.10 and older) - Latest version: v2.6.0, last updated October 8, 2026 - Domain: `espsomfy_rts_enhanced` - Source: - Issues: - Screenshot: https://vulpo.app/integrations-img/77b0c400d1e1b31d.webp (from xkain/ESPSomfy-RTS-enhanced's README) In Vulpo: Quick Toggle card, Cover card, Button card, Chart card, Apple Watch, Control Center ## Other ways in for Somfy | Name | Kind | Installs or stars | Connection | Upkeep | | --- | --- | --- | --- | --- | | [Overkiz](https://vulpo.app/integrations/core/overkiz.md) | Built-in integration | 17.4k installs sharing analytics | Works locally | Part of Home Assistant | | [ESPSomfy RTS](https://vulpo.app/integrations/marketplace/rstrouse-espsomfy-rts-ha.md) | Marketplace integration | 1.7k installs sharing analytics | Works locally | No update in over 18 months | | [Somfy MyLink](https://vulpo.app/integrations/core/somfy-mylink.md) | Built-in integration | 152 installs sharing analytics | Connection not stated | Part of Home Assistant | | [Somfy CUL](https://github.com/markuzzi/somfy_cul_integration) | Marketplace integration | 5 installs sharing analytics | Connection not stated | Updated in the last 6 months | | [Somfy SDN](https://github.com/ajguerre1/ha-somfy) | Marketplace integration | No installs sharing analytics yet | Works locally | Updated in the last 6 months | Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation. [About these numbers](https://vulpo.app/integrations/about) Last updated 2026-10-27. Source: https://vulpo.app/integrations/marketplace/xkain-espsomfy-rts-enhanced --- - HTML version of this page: https://vulpo.app/integrations/marketplace/xkain-espsomfy-rts-enhanced - Site index for agents: https://vulpo.app/llms.txt - Everything in one document: https://vulpo.app/llms-full.txt - All pages: https://vulpo.app/sitemap.xml