--- title: "Pluggit" description: "Pluggit is a Marketplace integration for Home Assistant. It has 169 installs sharing analytics, works locally and was last updated October 1, 2026." canonical: "https://vulpo.app/integrations/marketplace/tvalley71-pluggit" url: "https://vulpo.app/integrations/marketplace/tvalley71-pluggit.md" last-updated: "2026-10-22" version: "1.4" --- # Pluggit > Pluggit is a Marketplace integration for Home Assistant. It has 169 installs sharing analytics, works locally and was last updated October 1, 2026. Pluggit is a local Home Assistant integration for Pluggit ventilation units that communicate over Modbus on TCP/IP. It adds a ventilation fan, a bypass damper cover, a calendar, and switches for away, night, fireplace, summer, boost, eco and home modes. Sensors report temperatures, humidity, air quality, fan levels and alarms, while buttons reset the filter and alarms. Adaptive triggers can link boost, eco and home modes to other entities, and options cover update frequency, time synchronization and sensor filtering. Actions set unit state and configuration, reset the filter or alarm, and clear the adaptive event stack, with some settings needing newer firmware. Setup is done in the UI, with automatic discovery or a manually entered IP address and port. Automatic summary of the README and code of Tvalley71/pluggit. Something wrong, or are you the maintainer and want your own text here? [Get in touch](https://vulpo.app/contact) [Open in My Home Assistant](https://my.home-assistant.io/redirect/hacs_repository/?owner=Tvalley71&repository=pluggit&category=integration) On Home Assistant 2026.11 or newer? [Open it in the Marketplace](https://my.home-assistant.io/redirect/marketplace_repository/?owner=Tvalley71&repository=pluggit&category=integration) ## Supports - **Works locally**: Talks to your devices on your own network. No vendor cloud in between. - **From the Marketplace**: Installed through the Marketplace, formerly HACS. - **Actively maintained**: Its author released or pushed a change in the last six months. ## Setting it up Install it from the Marketplace and restart Home Assistant, then add it under Settings, Devices and services. ### Pluggit Configuration - **Device IP address** - **Enter prefix for the device entities** - **TCP port number** ### Select Manufacturer - **Manufacturer** ### Discovery - **Use automatic device discovery** ### After setup - **Continue** - **Device IP address** - **TCP port number** - **Data update frequency** - **Boost mode trigger entity** - **Eco mode trigger entity** - **Home mode trigger entity** - **Link calendar to primary device** - **Disable setting temperature sensors to unknown in bypass/summer modes** - **Disable notifications** - **Enable sensor filtering** - **Enable time synchronization** Texts from the code of [Tvalley71/pluggit](https://github.com/Tvalley71/pluggit). ## Entities - **Binary sensors**: Actions Pending - **Buttons**: Reset Filter, Reset Alarm - **Calendars**: Calendar - **Covers**: Bypass Damper - **Events**: Alarm Event, Filter Event - **Fans**: Ventilation - **Numbers**: Filter Lifetime, Humidity Setpoint, Humidity Setpoint (Summer), Air Quality Low Threshold, Air Quality Middle Threshold, Air Quality High Threshold, Bypass Minimum Temperature, Bypass Maximum Temperature, Manual Bypass Duration, Bypass Minimum Temperature (Summer), Bypass Maximum Temperature (Summer), Boost Mode Timeout, and 2 more - **Selects**: Operation Selection, Fan Selection, Week Program, Boost Operation Selection, Eco Operation Selection, Home Operation Selection, Default Operation Selection - **Sensors**: Operation Mode, Alarm, Adaptive State, Fan Level, Fan Speed 1, Fan Speed 2, Humidity, Humidity Level, Air Quality, Air Quality Level, Exhaust Temperature, Extract Temperature, and 8 more - **Switches**: Away Mode, Night Mode, Fireplace Mode, Manual Bypass Mode, Summer Mode, Boost Mode, Eco Mode, Home Mode, Disable Bypass Damper - **Texts**: Start Time for Night Mode, End Time for Night Mode ## Actions - **Set state**: Control the state of the ventilation unit with an action call. Fields: Device, Operation Selection, Fan Selection, Away Mode, Summer Mode, Fireplace Mode, Manual Bypass Mode - **Set configuration**: Adjust the configuration settings for the Pluggit device. Fields: Device, Filter Lifetime, Night Mode, Start Time for Night Mode, End Time for Night Mode, Week Program Selection, Air Quality Low Threshold, Air Quality Middle Threshold, Air Quality High Threshold - **Set configuration 2**: Adjust the configuration settings for the Pluggit device. Note: The following fields are only supported on device's with firmware version 2.70 or above. Fields: Device, Bypass Minimum Temperature, Bypass Maximum Temperature, Humidity Setpoint, Manual Bypass Duration, Disable Bypass Damper - **Set configuration 3**: Adjust the configuration settings for the Pluggit device. Note: The following fields are only supported on device's with firmware version 3.08 or above. Fields: Device, Bypass Minimum Temperature (Summer), Bypass Maximum Temperature (Summer), Humidity Setpoint (Summer) - **Filter reset**: Reset the filter remaining days to its filter lifetime. Fields: Device - **Alarm reset**: Reset first pending alarm. Fields: Device - **Clear adaptive event stack**: Clear all events from the adaptive event stack. This will remove all active adaptive events and reset the adaptive state to "none". Fields: Device ## Troubleshooting - **Diagnostics**: Downloads a diagnostics file to attach to a bug report. ## From the README > Home Assistant integration for Pluggit ventilation units From the README of [Tvalley71/pluggit](https://github.com/Tvalley71/pluggit#readme), [Apache License 2.0](https://spdx.org/licenses/Apache-2.0.html). Shortened. ## At a glance - Kind: Marketplace integration - Category: [Climate](https://vulpo.app/integrations/category/climate.md) - Number: 169 installs sharing analytics; 27 GitHub stars - Connection: Works locally - Upkeep: Updated in the last 6 months - Needs: Needs the Marketplace (HACS on 2026.10 and older) - Latest version: 1.4.0, last updated October 1, 2026 - Domain: `pluggit` - Source: - Issues: - Screenshot: https://vulpo.app/integrations-img/1aab10d5e1ce6181.webp (from Tvalley71/pluggit's README) - Screenshot: https://vulpo.app/integrations-img/72da26e2faa41481.webp (from Tvalley71/pluggit's README) In Vulpo: Quick Toggle card, Cover card, Fan card, Button card, Apple Watch, Control Center Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation. [About these numbers](https://vulpo.app/integrations/about) Last updated 2026-10-22. Source: https://vulpo.app/integrations/marketplace/tvalley71-pluggit --- - HTML version of this page: https://vulpo.app/integrations/marketplace/tvalley71-pluggit - Site index for agents: https://vulpo.app/llms.txt - Everything in one document: https://vulpo.app/llms-full.txt - All pages: https://vulpo.app/sitemap.xml