--- title: "Hi3510 IP Camera" description: "Hi3510 IP Camera is a Marketplace integration for Home Assistant. It has 60 installs sharing analytics, works locally and was last updated May 18, 2026." canonical: "https://vulpo.app/integrations/marketplace/spagonic-ha-hi3510" url: "https://vulpo.app/integrations/marketplace/spagonic-ha-hi3510.md" last-updated: "2026-10-22" version: "1.4" --- # Hi3510 IP Camera > Hi3510 IP Camera is a Marketplace integration for Home Assistant. It has 60 installs sharing analytics, works locally and was last updated May 18, 2026. Hi3510 IP Camera is an integration for IP cameras that use the Hi3510 CGI protocol on HiSilicon chips. It talks to the camera over the local network with HTTP Basic Auth and RTSP, without a cloud service. Each camera gets a live RTSP stream and JPEG snapshots, plus a motion binary sensor, switches for ONVIF, SD recording, flip and mirror, and number controls for image settings and audio volume. Motorized cameras get PTZ buttons, a preset selector and two services for moving the camera or going to and saving presets. Sensors report SD card space and status, firmware, model and cached recordings, and recordings on the SD card can be browsed and played back in Home Assistant. Setup runs in the UI with either a network scan or manual entry, and options cover cache retention, allowed networks, and polling and motion check intervals. Automatic summary of the README and code of spagonic/ha-hi3510. Something wrong, or are you the maintainer and want your own text here? [Get in touch](https://vulpo.app/contact) [Open in My Home Assistant](https://my.home-assistant.io/redirect/hacs_repository/?owner=spagonic&repository=ha-hi3510&category=integration) On Home Assistant 2026.11 or newer? [Open it in the Marketplace](https://my.home-assistant.io/redirect/marketplace_repository/?owner=spagonic&repository=ha-hi3510&category=integration) ## Supports - **Works locally**: Talks to your devices on your own network. No vendor cloud in between. - **From the Marketplace**: Installed through the Marketplace, formerly HACS. - **Actively maintained**: Its author released or pushed a change in the last six months. ## Setting it up Install it from the Marketplace and restart Home Assistant, then add it under Settings, Devices and services. ### Hi3510 IP Camera - **Setup method** ### Manual Camera Setup - **Host**: IP address or hostname of the camera - **HTTP Port**: HTTP port (default 80) - **Username** - **Password** - **RTSP Port**: RTSP streaming port (default 554) - **PTZ enabled (motorized camera)** ### Camera Credentials - **Username** - **Password** - **RTSP Port** - **PTZ enabled (motorized camera)** ### Select Camera - **Camera** ### After setup - **Host** - **HTTP Port** - **Username** - **Password** - **RTSP Port** - **Cache retention (days)**: Cached video files older than this will be automatically deleted (1-365) - **Allowed networks (CIDR, comma separated)**: Only requests from these networks can access the cache browser without authentication - **Polling interval (seconds)**: How often to poll camera parameters (10-300, default 30) - **Motion detection interval (seconds)**: How often to check for motion events (1-60, default 3) - **PTZ enabled (motorized camera)** Texts from the code of [spagonic/ha-hi3510](https://github.com/spagonic/ha-hi3510). ## Entities - **Binary sensors**: Motion - **Buttons**: Reboot, PTZ Left, PTZ Right, PTZ Up, PTZ Down, PTZ Home, PTZ Zoom In, PTZ Zoom Out - **Numbers**: Brightness, Contrast, Saturation, Sharpness, Audio Input Volume, Audio Output Volume - **Selects**: Infrared Mode, OSD Timestamp Position, OSD Name Position, PTZ Preset - **Sensors**: IP Address, Firmware, Model, Last Boot, SD Free Space, SD Total Space, SD Status, Cached Recordings - **Switches**: ONVIF, SD Recording, Flip, Mirror, OSD Timestamp, OSD Camera Name - **Texts**: OSD Text Region 1 ## Troubleshooting - **Diagnostics**: Downloads a diagnostics file to attach to a bug report. ## From the README > Custom integration for Home Assistant to control IP cameras that use the Hi3510 CGI protocol (/cgi-bin/hi3510/param.cgi). > > This protocol is used by hundreds of camera models based on HiSilicon (now HiStar) SoCs. Despite the "Hi3510" name, the protocol is shared across multiple chip generations including Hi3510, Hi3518A, Hi3518C, Hi3518EV100, Hi3518EV200/201, Hi3516CV100/200/300, Hi3516EV200/300, and others. These cameras are manufactured by dozens of Chinese OEMs and sold worldwide under many brand names. > > - Live video stream via RTSP (rtsp://host:rtsp\_port/11) > - JPEG snapshots from /tmpfs/auto.jpg > - Configurable RTSP port (default: 554) From the README of [spagonic/ha-hi3510](https://github.com/spagonic/ha-hi3510#readme), [MIT License](https://spdx.org/licenses/MIT.html). Shortened. ## At a glance - Kind: Marketplace integration - Category: [Security and safety](https://vulpo.app/integrations/category/security-and-safety.md), Cameras - Number: 60 installs sharing analytics; 4 GitHub stars - Connection: Works locally - Upkeep: Updated in the last 6 months - Needs: Needs the Marketplace (HACS on 2026.10 and older) - Latest version: v1.7.4, last updated May 18, 2026 - Domain: `hi3510` - Source: - Issues: - Screenshot: https://vulpo.app/integrations-img/0775376a65e5e248.webp (from spagonic/ha-hi3510's README) - Screenshot: https://vulpo.app/integrations-img/4bf47919505f7326.webp (from spagonic/ha-hi3510's README) In Vulpo: Quick Toggle card, Camera card, Button card, Select card, Apple Watch, Control Center Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation. [About these numbers](https://vulpo.app/integrations/about) Last updated 2026-10-22. Source: https://vulpo.app/integrations/marketplace/spagonic-ha-hi3510 --- - HTML version of this page: https://vulpo.app/integrations/marketplace/spagonic-ha-hi3510 - Site index for agents: https://vulpo.app/llms.txt - Everything in one document: https://vulpo.app/llms-full.txt - All pages: https://vulpo.app/sitemap.xml