---
title: "Hansgrohe Pontos"
description: "Hansgrohe Pontos is a Marketplace integration for Home Assistant. It has 56 installs sharing analytics, works locally and was last updated October 23, 2026."
canonical: "https://vulpo.app/integrations/marketplace/sangvikh-hass-pontos"
url: "https://vulpo.app/integrations/marketplace/sangvikh-hass-pontos.md"
last-updated: "2026-10-23"
version: "1.4"
---

# Hansgrohe Pontos

> Hansgrohe Pontos is a Marketplace integration for Home Assistant. It has 56 installs sharing analytics, works locally and was last updated October 23, 2026.

Hansgrohe Pontos is an integration for Hansgrohe Pontos and SYR water meters that communicates with the device locally. It adds sensors for water consumption, pressure, temperature, flow, WiFi signal, and battery and mains voltage. A valve entity controls the water supply, and a switch controls the buzzer. Buttons clear alarms, warnings and notifications or start a microleakage test, while selects and time entities set the profile, regeneration mode, and test and regeneration schedules. Actions are also provided to set the profile and the regeneration mode. Setup is done in the UI by entering the device IP address, fetch interval, name and type.

Automatic summary of the code of sangvikh/hass-pontos. Something wrong, or are you the maintainer and want your own text here? [Get in touch](https://vulpo.app/contact)

[Open in My Home Assistant](https://my.home-assistant.io/redirect/hacs_repository/?owner=sangvikh&repository=hass-pontos&category=integration)

On Home Assistant 2026.11 or newer? [Open it in the Marketplace](https://my.home-assistant.io/redirect/marketplace_repository/?owner=sangvikh&repository=hass-pontos&category=integration)

## Supports

- **Works locally**: Talks to your devices on your own network. No vendor cloud in between.
- **From the Marketplace**: Installed through the Marketplace, formerly HACS.
- **Actively maintained**: Its author released or pushed a change in the last six months.

## Setting it up

Install it from the Marketplace and restart Home Assistant, then add it under Settings, Devices and services.

### Set up device

- **IP Address**
- **Fetch interval (s)**
- **Device Name**
- **Device Type**

### After setup

- **IP Address**
- **Fetch interval (s)**

## Entities

- **Buttons**: Clear alarms, Clear warnings, Clear notifications, Start microleakage test
- **Selects**: Profile, Regeneration mode, Microleakage test interval, Regeneration interval
- **Sensors**: Total water consumption, Water pressure, Water temperature, Water flow, Time since last turbine pulse, Current water consumption, Leak test pressure drop, WiFi state, WiFi signal strength, Battery voltage, Mains voltage, Serial number, and 40 more
- **Switches**: Buzzer
- **Times**: Microleakage test time, Regeneration time
- **Valves**: Water supply

## Actions

- **Set Profile**
- **Set regeneration mode**

## At a glance

- Kind: Marketplace integration
- Category: [Water](https://vulpo.app/integrations/category/water.md), Meters and leak detection
- Number: 56 installs sharing analytics; 11 GitHub stars
- Connection: Works locally
- Upkeep: Updated in the last 6 months
- Needs: Needs the Marketplace (HACS on 2026.10 and older)
- Latest version: v2.9.3, last updated October 23, 2026
- Domain: `hass_pontos`
- Source: <https://github.com/sangvikh/hass-pontos>
- Issues: <https://github.com/sangvikh/hass-pontos/issues>

In Vulpo: Quick Toggle card, Button card, Select card, Valve card, Apple Watch, Control Center

Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation. [About these numbers](https://vulpo.app/integrations/about)

Last updated 2026-10-23. Source: https://vulpo.app/integrations/marketplace/sangvikh-hass-pontos

---

- HTML version of this page: https://vulpo.app/integrations/marketplace/sangvikh-hass-pontos
- Site index for agents: https://vulpo.app/llms.txt
- Everything in one document: https://vulpo.app/llms-full.txt
- All pages: https://vulpo.app/sitemap.xml