---
title: "Stiebel Eltron"
description: "Stiebel Eltron is a Marketplace integration for Home Assistant. It has 70 installs sharing analytics, works locally and was last updated October 27, 2026."
canonical: "https://vulpo.app/integrations/marketplace/pmq-stiebel-eltron-http"
url: "https://vulpo.app/integrations/marketplace/pmq-stiebel-eltron-http.md"
last-updated: "2026-10-22"
version: "1.4"
---

# Stiebel Eltron

> Stiebel Eltron is a Marketplace integration for Home Assistant. It has 70 installs sharing analytics, works locally and was last updated October 27, 2026.

Stiebel Eltron HTTP reads data from a local Stiebel Eltron ISG webserver and exposes it as Home Assistant sensors. It collects values from the connected heat pump, including room, outside, flow and domestic hot water temperatures, room humidity, and heating produced. It also reports energy consumption, including a separate figure for domestic hot water, which can be added to the Energy dashboard, along with compressor starts and on/off states for the compressor, heaters and defrost. It communicates locally and does not need Modbus on the ISG. The integration is read-only, so it cannot change temperatures or modes. Home Assistant can discover the device on the network and offer to add it, and setup asks only for the host name or IP address of the ISG.

Automatic summary of the README and code of pmq/stiebel-eltron-http. Something wrong, or are you the maintainer and want your own text here? [Get in touch](https://vulpo.app/contact)

[Open in My Home Assistant](https://my.home-assistant.io/redirect/hacs_repository/?owner=pmq&repository=stiebel-eltron-http&category=integration)

On Home Assistant 2026.11 or newer? [Open it in the Marketplace](https://my.home-assistant.io/redirect/marketplace_repository/?owner=pmq&repository=stiebel-eltron-http&category=integration)

## Supports

- **Works locally**: Talks to your devices on your own network. No vendor cloud in between.
- **Found by itself**: Home Assistant spots it on the network and offers to add it.
- **From the Marketplace**: Installed through the Marketplace, formerly HACS.
- **Actively maintained**: Its author released or pushed a change in the last six months.

## Setting it up

Install it from the Marketplace and restart Home Assistant, then add it under Settings, Devices and services.

### Connect

- **Host**: The hostname or IP address of your Stiebel Eltron ISG device.

Texts from the code of [pmq/stiebel-eltron-http](https://github.com/pmq/stiebel-eltron-http).

## At a glance

- Kind: Marketplace integration
- Category: [Climate](https://vulpo.app/integrations/category/climate.md), Heat pumps and air conditioning
- Number: 70 installs sharing analytics; 10 GitHub stars
- Connection: Works locally
- Upkeep: Updated in the last 6 months
- Needs: Needs the Marketplace (HACS on 2026.10 and older)
- Latest version: v1.7.0, last updated October 27, 2026
- Domain: `stiebel_eltron_http`
- Source: <https://github.com/pmq/stiebel-eltron-http>
- Issues: <https://github.com/pmq/stiebel-eltron-http/issues>
- Screenshot: https://vulpo.app/integrations-img/253d71884c0a6997.webp (from pmq/stiebel-eltron-http's README)
- Screenshot: https://vulpo.app/integrations-img/2a2126c866b1b73b.webp (from pmq/stiebel-eltron-http's README)

In Vulpo: Chart card, Apple Watch

Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation. [About these numbers](https://vulpo.app/integrations/about)

Last updated 2026-10-22. Source: https://vulpo.app/integrations/marketplace/pmq-stiebel-eltron-http

---

- HTML version of this page: https://vulpo.app/integrations/marketplace/pmq-stiebel-eltron-http
- Site index for agents: https://vulpo.app/llms.txt
- Everything in one document: https://vulpo.app/llms-full.txt
- All pages: https://vulpo.app/sitemap.xml