--- title: "Anycubic Cloud & LAN" description: "Anycubic Cloud & LAN is a Marketplace integration for Home Assistant. It has 363 installs sharing analytics, needs the vendor's cloud and was last updated October 22, 2026." canonical: "https://vulpo.app/integrations/marketplace/nino6689-hass-anycubic" url: "https://vulpo.app/integrations/marketplace/nino6689-hass-anycubic.md" last-updated: "2026-10-22" version: "1.4" --- # Anycubic Cloud & LAN > Anycubic Cloud & LAN is a Marketplace integration for Home Assistant. It has 363 installs sharing analytics, needs the vendor's cloud and was last updated October 22, 2026. Anycubic Cloud & LAN connects Anycubic Kobra and Photon 3D printers to Home Assistant through the vendor cloud or directly over the local network. It adds sensors, a camera, a job preview image, a printer light, and controls for fans, temperatures, print speed and axis movement. A notable part is support for the ACE filament unit, which appears as a child device with per-slot filament tracking, spool weight and price entries, feed and retract buttons, and drying controls. Actions cover setting slot material, starting a print with upload, deleting files from local, USB or cloud storage, and changing nozzle, hotbed and fan settings during a print. Setup happens in the UI with a copied account token, and the local option needs the printer address; the integration also offers firmware updates for the printer and ACE. Movement and heater commands were derived from watching the vendor slicer and tested only on a Kobra S1 with an ACE Pro. Automatic summary of the README and code of Nino6689/hass-anycubic. Something wrong, or are you the maintainer and want your own text here? [Get in touch](https://vulpo.app/contact) [Open in My Home Assistant](https://my.home-assistant.io/redirect/hacs_repository/?owner=Nino6689&repository=hass-anycubic&category=integration) On Home Assistant 2026.11 or newer? [Open it in the Marketplace](https://my.home-assistant.io/redirect/marketplace_repository/?owner=Nino6689&repository=hass-anycubic&category=integration) ## Supports - **Uses the vendor's cloud**: Needs an internet connection and an account with the vendor. - **Found by itself**: Home Assistant spots it on the network and offers to add it. - **From the Marketplace**: Installed through the Marketplace, formerly HACS. - **Actively maintained**: Its author released or pushed a change in the last six months. ## Setting it up Install it from the Marketplace and restart Home Assistant, then add it under Settings, Devices and services. ### Authentication Mode - Android App - **User Token** - **Device ID (Required for Android)** ### Authentication Mode - Slicer Next - **Slicer Access Token** ### Authentication Mode - Web - **User Token** ### Connect your Anycubic account - **Paste your token here**: A slicer token gives live, second-by-second updates and the control buttons. A web token gives status only. Whichever you paste, it's detected automatically. - **Device ID (only for the Android method — leave blank otherwise)**: Leave this empty unless you extracted a token from the Android app's network traffic. - **Which Anycubic service is your account on?**: Anycubic runs two separate services and they do not share accounts. Almost everyone should leave this on International. Choose China only if you signed up inside the Chinese app or at a .cn address — an account from one service does not exist on the other, so the wrong choice here reports your login as invalid. ### Connection - **Use the local connection (LAN Mode)** - **Printer address on your network**: For example 10.0.0.42. Only needed for the local connection. ### Connect directly to the printer - **Printer IP address** ### Choose your printers. - **Monitored Printers** ### After setup - **MQTT Connection Mode** - **Dry Preset 1 Duration** - **Dry Preset 1 Temperature** - **Dry Preset 2 Duration** - **Dry Preset 2 Temperature** - **Dry Preset 3 Duration** - **Dry Preset 3 Temperature** - **Dry Preset 4 Duration** - **Dry Preset 4 Temperature** - **Panel Card Config (YAML format)** - **Debug Log all MQTT messages** - **Debug Log all API calls** - **Use the local connection** - **Printer address on your network**: For example 10.0.0.42. A fixed address is strongly recommended. Texts from the code of [Nino6689/hass-anycubic](https://github.com/Nino6689/hass-anycubic). ## Entities - **Binary sensors**: Axis move refused, Axis moving, Drying Active, External spool loaded, Is Available, Is Busy, Job Complete, Job Failed, Filament insufficient for job, Job In Progress, Job Paused, MQTT Connection Active, and 2 more - **Buttons**: Refresh ACE Spools, ACE retract filament, ACE slot 1 feed, ACE slot 1 reset spool, ACE slot 2 feed, ACE slot 2 reset spool, ACE slot 3 feed, ACE slot 3 reset spool, ACE slot 4 feed, ACE slot 4 reset spool, Home all axes, Home X and Y, and 30 more - **Cameras**: Camera, Cloud camera - **Images**: Job Preview - **Lights**: Printer Light - **Numbers**: ACE slot 1 spool price per kg, ACE slot 1 spool weight, ACE slot 2 spool price per kg, ACE slot 2 spool weight, ACE slot 3 spool price per kg, ACE slot 3 spool weight, ACE slot 4 spool price per kg, ACE slot 4 spool weight, Drying duration, Drying temperature, Set auxiliary fan speed, Set chamber fan level, and 3 more - **Selects**: Axis step size, Print speed mode - **Sensors**: ACE Current Temperature, ACE Humidity, ACE Loaded Slot, ACE Slot 1, ACE slot 1 filament remaining, ACE slot 1 filament remaining percent, ACE Slot 2, ACE slot 2 filament remaining, ACE slot 2 filament remaining percent, ACE Slot 3, ACE slot 3 filament remaining, and 69 more - **Switches**: AI failure detection, Manual MQTT Connection Enabled, ACE Run-out Refill, Secondary ACE Run-out Refill - **Updates**: Printer Firmware, ACE Firmware, Secondary ACE Firmware ## Actions - **ACE Set Slot - PLA**: Sets PLA slot properties in ACE unit. Fields: Config Entry, Printer Device, Printer ID, Box ID, Slot Number, Slot Color Red, Slot Color Green, Slot Color Blue - **ACE Set Slot - PETG**: Sets PETG slot properties in ACE unit. Fields: Config Entry, Printer Device, Printer ID, Box ID, Slot Number, Slot Color Red, Slot Color Green, Slot Color Blue - **ACE Set Slot - ABS**: Sets ABS slot properties in ACE unit. Fields: Config Entry, Printer Device, Printer ID, Box ID, Slot Number, Slot Color Red, Slot Color Green, Slot Color Blue - **ACE Set Slot - PACF**: Sets PACF slot properties in ACE unit. Fields: Config Entry, Printer Device, Printer ID, Box ID, Slot Number, Slot Color Red, Slot Color Green, Slot Color Blue - **ACE Set Slot - PC**: Sets PC slot properties in ACE unit. Fields: Config Entry, Printer Device, Printer ID, Box ID, Slot Number, Slot Color Red, Slot Color Green, Slot Color Blue - **ACE Set Slot - ASA**: Sets ASA slot properties in ACE unit. Fields: Config Entry, Printer Device, Printer ID, Box ID, Slot Number, Slot Color Red, Slot Color Green, Slot Color Blue - **ACE Set Slot - HIPS**: Sets HIPS slot properties in ACE unit. Fields: Config Entry, Printer Device, Printer ID, Box ID, Slot Number, Slot Color Red, Slot Color Green, Slot Color Blue - **ACE Set Slot - PA**: Sets PA slot properties in ACE unit. Fields: Config Entry, Printer Device, Printer ID, Box ID, Slot Number, Slot Color Red, Slot Color Green, Slot Color Blue - **ACE Set Slot - PLA SE**: Sets PLA SE slot properties in ACE unit. Fields: Config Entry, Printer Device, Printer ID, Box ID, Slot Number, Slot Color Red, Slot Color Green, Slot Color Blue - **ACE Filament Extrude**: Activate filament extrude on ACE. Fields: Config Entry, Printer Device, Printer ID, Box ID, Slot Number, Extrude Finished - **ACE Filament Retract**: Activate filament retract on ACE. Fields: Config Entry, Printer Device, Printer ID, Box ID - **Print and upload (save in user cloud).**: Print and upload, save in user cloud store. Fields: Config Entry, Printer Device, Printer ID, Slot Number List, Gcode File - **Print and upload (no cloud save).**: Print and upload, but don't save in user cloud store. Fields: Config Entry, Printer Device, Printer ID, Slot Number List, Gcode File - **Delete file (Local)**: Delete a file from printer local storage. Fields: Config Entry, Printer Device, Printer ID, File Name - **Delete file (USB Disk)**: Delete a file from printer USB disk. Fields: Config Entry, Printer Device, Printer ID, File Name - **Delete file (Cloud)**: Delete a file from user cloud store. Fields: Config Entry, Printer Device, Printer ID, File ID - **Change Print Speed Mode**: Change Print Speed Mode Fields: Config Entry, Printer Device, Printer ID, Speed Mode - **Change Print Nozzle Temperature**: Change Print Nozzle Temperature Fields: Config Entry, Printer Device, Printer ID, Nozzle Temperature - **Change Print Hotbed Temperature**: Change Print Hotbed Temperature Fields: Config Entry, Printer Device, Printer ID, Hotbed Temperature - **Change Print Fan Speed**: Change Print Fan Speed Fields: Config Entry, Printer Device, Printer ID, Fan Speed ## Troubleshooting - **Diagnostics**: Downloads a diagnostics file to attach to a bug report. ## From the README > Home Assistant integration for Anycubic 3D printers > > Monitor and control your Anycubic Kobra or Photon from Home Assistant — From the README of [Nino6689/hass-anycubic](https://github.com/Nino6689/hass-anycubic#readme), [GNU GPL v3.0](https://spdx.org/licenses/GPL-3.0.html). Shortened. ## At a glance - Kind: Marketplace integration - Category: [Computers and network](https://vulpo.app/integrations/category/computers-and-network.md), Printers - Number: 363 installs sharing analytics; 28 GitHub stars - Connection: Needs the vendor's cloud - Upkeep: Updated in the last 6 months - Needs: Needs the Marketplace (HACS on 2026.10 and older) - Latest version: v2.9.10, last updated October 22, 2026 - Domain: `anycubic_cloud` - Source: - Issues: - Screenshot: https://vulpo.app/integrations-img/d56645c49374be7d.webp (from Nino6689/hass-anycubic's README) - Screenshot: https://vulpo.app/integrations-img/f7bfaee7090885c0.webp (from Nino6689/hass-anycubic's README) - Screenshot: https://vulpo.app/integrations-img/ed114301cbcae876.webp (from Nino6689/hass-anycubic's README) In Vulpo: Light card, Quick Toggle card, Camera card, Button card, Apple Watch, Control Center Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation. [About these numbers](https://vulpo.app/integrations/about) Last updated 2026-10-22. Source: https://vulpo.app/integrations/marketplace/nino6689-hass-anycubic --- - HTML version of this page: https://vulpo.app/integrations/marketplace/nino6689-hass-anycubic - Site index for agents: https://vulpo.app/llms.txt - Everything in one document: https://vulpo.app/llms-full.txt - All pages: https://vulpo.app/sitemap.xml