---
title: "Tedee BLE"
description: "Tedee BLE is a Marketplace integration for Home Assistant. It has 50 installs sharing analytics, works locally and was last updated October 16, 2026."
canonical: "https://vulpo.app/integrations/marketplace/meltingice1337-tedee-ble"
url: "https://vulpo.app/integrations/marketplace/meltingice1337-tedee-ble.md"
last-updated: "2026-11-15"
version: "1.4"
---

# Tedee BLE

> Tedee BLE is a Marketplace integration for Home Assistant. It has 50 installs sharing analytics, works locally and was last updated October 16, 2026.

From the [repository description](https://github.com/meltingice1337/tedee_ble):

> Local BLE integration for Tedee smart locks in Home Assistant

[Open in My Home Assistant](https://my.home-assistant.io/redirect/marketplace_repository/?owner=meltingice1337&repository=tedee_ble&category=integration)

On Home Assistant 2026.10 or older? [Open it in HACS](https://my.home-assistant.io/redirect/hacs_repository/?owner=meltingice1337&repository=tedee_ble&category=integration)

## Supports

- **Works locally**: Talks to your devices on your own network. No vendor cloud in between.
- **Found by itself**: Home Assistant spots it on the network and offers to add it.
- **From the Marketplace**: Installed through the Marketplace, formerly HACS.
- **Actively maintained**: Its author released or pushed a change in the last six months.

## Setting it up

Install it from the Marketplace and restart Home Assistant, then add it under Settings, Devices and services.

### Tedee Cloud API

- **Personal Access Key**

Also asked when confirming the device and signing in again.

### Select Lock

- **Lock**

### BLE Address

- **MAC Address**

### After setup

- **Pull spring on unlock**: When enabled (default), unlocking also pulls the spring to open the door. Disable to unlock without pulling.

Texts from the code of [meltingice1337/tedee\_ble](https://github.com/meltingice1337/tedee_ble).

## Entities

- **Binary sensors**: Door, Battery charging, Firmware update, Calibration required
- **Locks**: Lock
- **Sensors**: Battery, Door sensor battery

## From the README

> Control your Tedee smart lock over Bluetooth Low Energy directly from Home Assistant.
>
> - Lock, Unlock, and Open - Full lock control including pull spring (open latch) support. The lock entity also surfaces transitional states like locking, unlocking, partially\_unlocked, and jammed
> - Auto-pull on unlock - Optional setting; when disabled, the integration sends UNLOCK\_NO\_PULL so the lock-side auto-pull setting (configured in the Tedee mobile app) is overridden — the Home Assistant…
> - Door open/closed sensor - If your Tedee lock has the optional door sensor accessory installed, the integration exposes a binary sensor showing whether the door is open or closed
> - Battery monitoring - Battery percentage as a sensor, plus a separate charging binary sensor on rechargeable models (PRO / PRO 2; GO runs on CR123A cells and gets no charging entity). The battery…
> - Real-time state updates - Lock state changes are pushed instantly via BLE notifications, with a 10-minute polling safety net and a 45-second keep-alive
> - Jam detection - The lock reports if it gets jammed during locking or unlocking
> - Activity tracking - See who triggered the last action and how (see details below)
> - Firmware-update awareness - Firmware version shown on the device page; a diagnostic binary sensor turns on when an update is available (per cloud API) or while the lock is actively applying one. The…

From the README of [meltingice1337/tedee\_ble](https://github.com/meltingice1337/tedee_ble#readme), [MIT License](https://spdx.org/licenses/MIT.html). Shortened.

## At a glance

- Kind: Marketplace integration
- Category: [Security and safety](https://vulpo.app/integrations/category/security-and-safety.md), Locks and access
- Number: 50 installs sharing analytics; 18 GitHub stars
- Connection: Works locally
- Upkeep: Updated in the last 6 months
- Needs: Needs the Marketplace (HACS on 2026.10 and older)
- Latest version: v0.3.1, last updated October 16, 2026
- Domain: `tedee_ble`
- Source: <https://github.com/meltingice1337/tedee_ble>
- Issues: <https://github.com/meltingice1337/tedee_ble/issues>

In Vulpo: Lock card, Chart card, Apple Watch

Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation. [About these numbers](https://vulpo.app/integrations/about)

Last updated 2026-11-15. Source: https://vulpo.app/integrations/marketplace/meltingice1337-tedee-ble

---

- HTML version of this page: https://vulpo.app/integrations/marketplace/meltingice1337-tedee-ble
- Site index for agents: https://vulpo.app/llms.txt
- Everything in one document: https://vulpo.app/llms-full.txt
- All pages: https://vulpo.app/sitemap.xml
