--- title: "Home Performance" description: "Home Performance is a Marketplace integration for Home Assistant. It has 61 installs sharing analytics, works locally and was last updated June 12, 2026." canonical: "https://vulpo.app/integrations/marketplace/hugofromfrance-home-performance" url: "https://vulpo.app/integrations/marketplace/hugofromfrance-home-performance.md" last-updated: "2026-10-22" version: "1.4" --- # Home Performance > Home Performance is a Marketplace integration for Home Assistant. It has 61 installs sharing analytics, works locally and was last updated June 12, 2026. Home Performance is an integration that analyzes the thermal performance and insulation quality of rooms from real heating data. Each room is set up as a zone with an indoor and outdoor temperature sensor and a heating entity, and it works with electric heaters, heat pumps, gas boilers and gas furnaces. It measures a heat loss coefficient per room, also per floor area and per volume, and reports daily estimated and measured energy, heating time and an energy performance rating. Optional inputs include a power sensor, an energy meter, a window or door contact sensor, a weather entity for wind data and the room orientation. Binary sensors show window open, heating active and data readiness, and an optional push notification warns when a window is open while heating runs. Two actions reset a zone's rolling history or all of its calibration data, and it runs locally and is configured in the UI. Automatic summary of the README and code of Hugofromfrance/home\_performance. Something wrong, or are you the maintainer and want your own text here? [Get in touch](https://vulpo.app/contact) [Open in My Home Assistant](https://my.home-assistant.io/redirect/hacs_repository/?owner=Hugofromfrance&repository=home_performance&category=integration) On Home Assistant 2026.11 or newer? [Open it in the Marketplace](https://my.home-assistant.io/redirect/marketplace_repository/?owner=Hugofromfrance&repository=home_performance&category=integration) ## Supports - **Works locally**: Talks to your devices on your own network. No vendor cloud in between. - **From the Marketplace**: Installed through the Marketplace, formerly HACS. - **Actively maintained**: Its author released or pushed a change in the last six months. ## Setting it up Install it from the Marketplace and restart Home Assistant, then add it under Settings, Devices and services. ### Zone Configuration - **Zone name**: Unique name to identify this room (e.g., Bedroom, Living Room) - **Indoor temperature sensor**: Sensor measuring the room temperature - **Outdoor temperature sensor**: Sensor measuring the outdoor temperature - **Heating entity**: Switch, thermostat, climate or select entity controlling the heating - **Heating active states**: Comma-separated list of states that indicate active heating (for select entities). Default: heating, heat, on - **Heat source type**: Type of heating system - **Heater power**: Nominal heater power in Watts (required for electric, optional for others) - **Efficiency factor**: Converts consumed energy to thermal output. Electric: 1.0, Heat pump: 2.5-4.0 (COP), Gas boiler: 0.85-0.95, Gas furnace: 0.78-0.90 ### Dimensions and optional sensors - **Floor Area**: Floor area to calculate K coefficient per m² - **Room volume**: Volume to calculate K coefficient per m³ - **Power sensor (optional)**: Real-time power sensor (W) for precise heating detection and energy integration - **Heating detection threshold**: Power in Watts above which heating is considered active (default: 50W) - **Energy meter (optional)**: Daily energy counter (kWh) that resets at midnight (e.g., Utility Meter). Most accurate for K calculation. Required for heat pump/gas, falls back to power\_sensor or heater\_power if not set - **Window/Door sensor (optional)**: Physical window/door contact sensor for accurate open detection (instead of temperature-based) - **Weather entity (optional)**: Weather entity for wind data (shared between zones) - **Room orientation (optional)**: Main facade orientation to determine wind exposure ### Window Alert Notifications - **Enable window open alerts**: Send a push notification when window is open and heating is active - **Mobile device for notifications**: Select the mobile device to receive notifications - **Delay before sending notification**: Wait this many minutes before alerting (avoids alerts for quick openings) ### After setup - **Heat source type**: Type of heating system - **Heating active states**: Comma-separated list of states that indicate active heating (for select entities). Default: heating, heat, on - **Heater power**: Nominal heater power in Watts (required for electric, optional for others) - **Efficiency factor**: Converts consumed energy to thermal output. Electric: 1.0, Heat pump: 2.5-4.0 (COP), Gas boiler: 0.85-0.95, Gas furnace: 0.78-0.90 - **Floor Area**: Floor area to calculate K coefficient per m² - **Room volume**: Volume to calculate K coefficient per m³ - **Power sensor**: Real-time power sensor (W) for precise heating detection - **Heating detection threshold**: Power in Watts above which heating is considered active (default: 50W) - **Energy meter**: Daily energy counter (kWh) that resets at midnight (e.g., Utility Meter). Most accurate for K calculation. Required for heat pump/gas, takes priority - **Window/Door sensor**: Physical window/door contact sensor for accurate open detection - **Enable window open alerts**: Send push notification when window is open and heating is active - **Mobile device for notifications**: Select the mobile device to receive notifications - **Delay before notification**: Wait this many minutes before alerting (avoids alerts for quick openings) - **Weather entity**: Weather entity for wind data (shared between zones) - **Room orientation**: Main facade orientation to determine wind exposure - **Enable dynamic COP calculation**: Calculate real COP from measured energy data instead of using static efficiency factor. Requires an energy sensor. - **Enable window open alerts**: Send push notification when window is open and heating is active - **Mobile device**: Select the mobile device to receive notifications - **Delay before notification**: Wait this many minutes before alerting (avoids alerts for quick openings) Texts from the code of [Hugofromfrance/home\_performance](https://github.com/Hugofromfrance/home_performance). ## Entities - **Binary sensors**: Window Open, Heating Active, Data Ready - **Sensors**: K Coefficient, K per m², K per m³, Daily Estimated Energy, Daily Measured Energy, Heating Time (24h), Heating Ratio (24h), Energy Performance, Average ΔT (24h), Data Hours, Analysis Time Remaining, Analysis Progress, and 7 more ## Actions - **Reset History**: Reset the 7-day rolling history for a zone. Use this after insulation work or to clear anomalous data. The insulation rating will be recalculated from scratch. Fields: Zone Name - **Reset All Data**: Completely reset ALL calibration data for a zone. Use when measurements were taken during unusual conditions (many guests, oven running, etc.) or to start fresh calibration. Fields: Zone Name ## From the README > A Home Assistant integration to analyze and monitor the thermal performance of your home. > > - 📋 List View - All zones with expandable details (click to expand) > - 🏆 Compare View - Ranking by K/m³ performance with percentage difference > - 🔄 Toggle - Switch between List and Compare views > - 📊 Sparklines - Mini trend graphs for each zone > - 🎯 Average Score - Overall home performance at a glance From the README of [Hugofromfrance/home\_performance](https://github.com/Hugofromfrance/home_performance#readme), [MIT License](https://spdx.org/licenses/MIT.html). Shortened. ## At a glance - Kind: Marketplace integration - Number: 61 installs sharing analytics; 38 GitHub stars - Connection: Works locally - Upkeep: Updated in the last 6 months - Needs: Needs the Marketplace (HACS on 2026.10 and older) - Latest version: v1.4.2, last updated June 12, 2026 - Domain: `home_performance` - Source: - Issues: - Screenshot: https://vulpo.app/integrations-img/c70c96c1cfe20ac3.webp (from Hugofromfrance/home\_performance's README) In Vulpo: Chart card, Apple Watch Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation. [About these numbers](https://vulpo.app/integrations/about) Last updated 2026-10-22. Source: https://vulpo.app/integrations/marketplace/hugofromfrance-home-performance --- - HTML version of this page: https://vulpo.app/integrations/marketplace/hugofromfrance-home-performance - Site index for agents: https://vulpo.app/llms.txt - Everything in one document: https://vulpo.app/llms-full.txt - All pages: https://vulpo.app/sitemap.xml