---
title: "Siku (Blauberg) Fan"
description: "Siku (Blauberg) Fan is a Marketplace integration for Home Assistant. It has 105 installs sharing analytics, works locally and was last updated October 26, 2026."
canonical: "https://vulpo.app/integrations/marketplace/hmn-siku-integration"
url: "https://vulpo.app/integrations/marketplace/hmn-siku-integration.md"
last-updated: "2026-10-23"
version: "1.4"
---

# Siku (Blauberg) Fan

> Siku (Blauberg) Fan is a Marketplace integration for Home Assistant. It has 105 installs sharing analytics, works locally and was last updated October 26, 2026.

Siku (Blauberg) Fan is an integration that controls Siku, Duka, Oxxify and Blauberg fans from Home Assistant. It communicates with the fan locally and is set up in the UI by entering the IP address, port, hardware version and update interval. Fans with the newer protocol use a fan ID and password during setup. It provides fan, button, number and sensor entities. Besides three fixed speeds, the fan has a manual mode, and a number entity sets an exact speed as a percentage from 1 to 100. On older hardware, values below 9 percent are raised to 9 percent because the motor does not run below that. Breezy fans use a different protocol and are not compatible.

Automatic summary of the README and code of hmn/siku-integration. Something wrong, or are you the maintainer and want your own text here? [Get in touch](https://vulpo.app/contact)

[Open in My Home Assistant](https://my.home-assistant.io/redirect/hacs_repository/?owner=hmn&repository=siku-integration&category=integration)

On Home Assistant 2026.11 or newer? [Open it in the Marketplace](https://my.home-assistant.io/redirect/marketplace_repository/?owner=hmn&repository=siku-integration&category=integration)

## Supports

- **Works locally**: Talks to your devices on your own network. No vendor cloud in between.
- **From the Marketplace**: Installed through the Marketplace, formerly HACS.
- **Actively maintained**: Its author released or pushed a change in the last six months.

## Setting it up

Install it from the Marketplace and restart Home Assistant, then add it under Settings, Devices and services.

### Connect

- **IP address**
- **Port**
- **Hardware version**
- **Fan ID (only v2)**
- **Fan password (only v2)**
- **Update interval (seconds)**

Also asked when changing the connection.

Texts from the code of [hmn/siku-integration](https://github.com/hmn/siku-integration).

## From the README

> This component will set up the following platforms.

From the README of [hmn/siku-integration](https://github.com/hmn/siku-integration#readme), [MIT License](https://spdx.org/licenses/MIT.html). Shortened.

## At a glance

- Kind: Marketplace integration
- Category: [Climate](https://vulpo.app/integrations/category/climate.md), Fans and ventilation
- Number: 105 installs sharing analytics; 25 GitHub stars
- Connection: Works locally
- Upkeep: Updated in the last 6 months
- Needs: Needs the Marketplace (HACS on 2026.10 and older)
- Latest version: v2.3.2, last updated October 26, 2026
- Domain: `siku`
- Source: <https://github.com/hmn/siku-integration>
- Issues: <https://github.com/hmn/siku-integration/issues>

In Vulpo: Fan card, Button card, Chart card, Apple Watch

Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation. [About these numbers](https://vulpo.app/integrations/about)

Last updated 2026-10-23. Source: https://vulpo.app/integrations/marketplace/hmn-siku-integration

---

- HTML version of this page: https://vulpo.app/integrations/marketplace/hmn-siku-integration
- Site index for agents: https://vulpo.app/llms.txt
- Everything in one document: https://vulpo.app/llms-full.txt
- All pages: https://vulpo.app/sitemap.xml