---
title: "Ferroamp MQTT Sensors"
description: "Ferroamp MQTT Sensors is a Marketplace integration for Home Assistant. It has 115 installs sharing analytics, needs the vendor's cloud and was last updated October 26, 2026."
canonical: "https://vulpo.app/integrations/marketplace/henricm-ha-ferroamp"
url: "https://vulpo.app/integrations/marketplace/henricm-ha-ferroamp.md"
last-updated: "2026-10-22"
version: "1.4"
---

# Ferroamp MQTT Sensors

> Ferroamp MQTT Sensors is a Marketplace integration for Home Assistant. It has 115 installs sharing analytics, needs the vendor's cloud and was last updated October 26, 2026.

Ferroamp MQTT Sensors adds Home Assistant sensors for Ferroamp EnergyHub, SSO, ESM and ESO units. It reads the data that the Ferroamp system publishes over MQTT, so the Home Assistant MQTT integration has to be connected to the Ferroamp broker first. Sensor names start with the name given to the integration, and SSO and ESO sensors include the unit id. ESO and SSO units get a raw fault code sensor and a decoded fault state sensor that lists active faults by name. Values are updated every 30 seconds by default, with averages where suitable, and the interval can be changed in the options. The integration also adds services to charge, discharge or return the battery to autocharge.

Automatic summary of the README and code of henricm/ha-ferroamp. Something wrong, or are you the maintainer and want your own text here? [Get in touch](https://vulpo.app/contact)

[Open in My Home Assistant](https://my.home-assistant.io/redirect/hacs_repository/?owner=henricm&repository=ha-ferroamp&category=integration)

On Home Assistant 2026.11 or newer? [Open it in the Marketplace](https://my.home-assistant.io/redirect/marketplace_repository/?owner=henricm&repository=ha-ferroamp&category=integration)

## Supports

- **Uses the vendor's cloud**: Needs an internet connection and an account with the vendor.
- **From the Marketplace**: Installed through the Marketplace, formerly HACS.
- **Actively maintained**: Its author released or pushed a change in the last six months.

## Setting it up

Install it from the Marketplace and restart Home Assistant, then add it under Settings, Devices and services.

### MQTT prefix and name

- **Name of the EnergyHub**
- **Prefix**

### After setup

- **Update interval in seconds (defaults to 30 if left blank)**

Texts from the code of [henricm/ha-ferroamp](https://github.com/henricm/ha-ferroamp).

## At a glance

- Kind: Marketplace integration
- Category: [Hubs and protocols](https://vulpo.app/integrations/category/hubs-and-protocols.md)
- Number: 115 installs sharing analytics; 41 GitHub stars
- Connection: Needs the vendor's cloud
- Upkeep: Updated in the last 6 months
- Needs: Needs the Marketplace (HACS on 2026.10 and older)
- Latest version: v1.18.0, last updated October 26, 2026
- Domain: `ferroamp`
- Source: <https://github.com/henricm/ha-ferroamp>
- Issues: <https://github.com/henricm/ha-ferroamp/issues>

In Vulpo: Chart card, Apple Watch

Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation. [About these numbers](https://vulpo.app/integrations/about)

Last updated 2026-10-22. Source: https://vulpo.app/integrations/marketplace/henricm-ha-ferroamp

---

- HTML version of this page: https://vulpo.app/integrations/marketplace/henricm-ha-ferroamp
- Site index for agents: https://vulpo.app/llms.txt
- Everything in one document: https://vulpo.app/llms-full.txt
- All pages: https://vulpo.app/sitemap.xml