---
title: "Pilot wire climate"
description: "Pilot wire climate is a Marketplace integration for Home Assistant. It has 58 installs sharing analytics, works locally and was last updated October 5, 2026."
canonical: "https://vulpo.app/integrations/marketplace/faizpuru-ha-pilot-wire-climate"
url: "https://vulpo.app/integrations/marketplace/faizpuru-ha-pilot-wire-climate.md"
last-updated: "2026-10-22"
version: "1.4"
---

# Pilot wire climate

> Pilot wire climate is a Marketplace integration for Home Assistant. It has 58 installs sharing analytics, works locally and was last updated October 5, 2026.

Pilot wire climate turns a select entity and a power entity into a single thermostat for pilot wire heating. The select entity changes the pilot wire preset modes, while the power entity shows whether the heater is currently heating. A configurable power threshold sets the level above which the heater counts as heating. A default preset can be chosen for when the thermostat is powered on, and optional extra modes add Comfort -1 °C and Comfort -2 °C. Temperature and humidity sensors can optionally be linked to show current readings. It works locally and is set up in the UI, with YAML also available.

Automatic summary of the README and code of faizpuru/ha-pilot-wire-climate. Something wrong, or are you the maintainer and want your own text here? [Get in touch](https://vulpo.app/contact)

[Open in My Home Assistant](https://my.home-assistant.io/redirect/hacs_repository/?owner=faizpuru&repository=ha-pilot-wire-climate&category=integration)

On Home Assistant 2026.11 or newer? [Open it in the Marketplace](https://my.home-assistant.io/redirect/marketplace_repository/?owner=faizpuru&repository=ha-pilot-wire-climate&category=integration)

## Supports

- **Works locally**: Talks to your devices on your own network. No vendor cloud in between.
- **From the Marketplace**: Installed through the Marketplace, formerly HACS.
- **Actively maintained**: Its author released or pushed a change in the last six months.

## Setting it up

Install it from the Marketplace and restart Home Assistant, then add it under Settings, Devices and services.

### Add Pilot Wire Thermostat

- **Select Entity**: Select entity used to control the presets.
- **Temperature Sensor**: Temperature sensor that reflects the current temperature.
- **Humidity Sensor**: Humidity sensor that reflects the current humidity.
- **Power Sensor**: Power sensor used to monitor heater activity.
- **Additional Modes**: Enable additional modes (Comfort -1 °C and Comfort -2 °C).
- **Power Threshold**: Power threshold above which the heater is considered to be heating.
- **Default preset**: Default power-on preset

### After setup

- **Select Entity**: Select entity used to control the presets.
- **Temperature Sensor**: Temperature sensor that reflects the current temperature.
- **Humidity Sensor**: Humidity sensor that reflects the current humidity.
- **Power Sensor**: Power sensor used to monitor heater activity.
- **Additional Modes**: Enable additional modes (Comfort -1 °C and Comfort -2 °C).
- **Power Threshold**: Power threshold above which the heater is considered to be heating.
- **Default preset**: Default power-on preset

Texts from the code of [faizpuru/ha-pilot-wire-climate](https://github.com/faizpuru/ha-pilot-wire-climate).

## Entities

- **Climate**: Thermostat

## Actions

- **Reload**: Reloads pilot wire thermostats from the YAML configuration.

## From the README

> - Converts select and power entities into a single climate entity.
> - Utilizes the select entity to adjust the pilot wire preset modes.
> - Uses the power entity to detect whether the heating is on or off.
> - Configurable power threshold to determine heating state.
> - Configurable default power on preset.
> - Optional support for temperature and humidity sensor entities.

From the README of [faizpuru/ha-pilot-wire-climate](https://github.com/faizpuru/ha-pilot-wire-climate#readme), [MIT License](https://spdx.org/licenses/MIT.html). Shortened.

## At a glance

- Kind: Marketplace integration
- Category: [Climate](https://vulpo.app/integrations/category/climate.md)
- Number: 58 installs sharing analytics; 17 GitHub stars
- Connection: Works locally
- Upkeep: Updated in the last 6 months
- Needs: Needs the Marketplace (HACS on 2026.10 and older)
- Latest version: 1.1.0, last updated October 5, 2026
- Domain: `pilot_wire_climate`
- Source: <https://github.com/faizpuru/ha-pilot-wire-climate>
- Issues: <https://github.com/faizpuru/ha-pilot-wire-climate/issues>

In Vulpo: Climate card, Apple Watch, Climate Live Activity (Pro)

[Widgets & Live Activities in Vulpo](https://vulpo.app/features/widgets-and-live-activities)

Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation. [About these numbers](https://vulpo.app/integrations/about)

Last updated 2026-10-22. Source: https://vulpo.app/integrations/marketplace/faizpuru-ha-pilot-wire-climate

---

- HTML version of this page: https://vulpo.app/integrations/marketplace/faizpuru-ha-pilot-wire-climate
- Site index for agents: https://vulpo.app/llms.txt
- Everything in one document: https://vulpo.app/llms-full.txt
- All pages: https://vulpo.app/sitemap.xml