---
title: "KEF"
description: "KEF is a Marketplace integration for Home Assistant. It has 50 installs sharing analytics, works locally and was last updated November 13, 2026."
canonical: "https://vulpo.app/integrations/marketplace/evotecit-homeassistant-kef"
url: "https://vulpo.app/integrations/marketplace/evotecit-homeassistant-kef.md"
last-updated: "2026-11-20"
version: "1.4"
---

# KEF

> KEF is a Marketplace integration for Home Assistant. It has 50 installs sharing analytics, works locally and was last updated November 13, 2026.

From the [repository description](https://github.com/EvotecIT/homeassistant-kef):

> Control your KEF speakers on your home network: volume, inputs, standby and speaker settings, no cloud.

[Open in My Home Assistant](https://my.home-assistant.io/redirect/marketplace_repository/?owner=EvotecIT&repository=homeassistant-kef&category=integration)

On Home Assistant 2026.10 or older? [Open it in HACS](https://my.home-assistant.io/redirect/hacs_repository/?owner=EvotecIT&repository=homeassistant-kef&category=integration)

## Supports

- **Works locally**: Talks to your devices on your own network. No vendor cloud in between.
- **Found by itself**: Home Assistant spots it on the network and offers to add it.
- **From the Marketplace**: Installed through the Marketplace, formerly HACS.
- **Actively maintained**: Its author released or pushed a change in the last six months.

## Setting it up

Install it from the Marketplace and restart Home Assistant, then add it under Settings, Devices and services.

### Add KEF speaker

- **Host or IP address**
- **Web UI password**

Also asked when changing the connection.

### Confirm

- **Web UI password**

Also asked when signing in again.

### After setup

- **Web UI password**: Only needed when the speaker's web interface is password protected. Leave empty otherwise.
- **Polling interval**: How often the speaker is checked while it is online. On newer speakers, changes made in the KEF app or on the speaker arrive right away through the live event queue, and polling is the fallback. Lower is more responsive, higher means less network traffic.
- **Offline retry interval**: How often a speaker that stopped responding is checked again, for example when its power is switched off. A speaker counts as offline after three missed polls in a row. When it powers up, it announces itself on the network and reconnects right away, so this interval only matters if that announcement is missed.
- **Expose diagnostic sensors**: Adds extra sensors for troubleshooting: Wi-Fi signal and network details, speed test results, alarm and timer counts, and raw audio values. Leave off to keep the device page tidy.
- **Expose EQ read-only sensors (advanced)**

Texts from the code of [EvotecIT/homeassistant-kef](https://github.com/EvotecIT/homeassistant-kef).

## Entities

- **Binary sensors**: SUR: Mode
- **Buttons**: DSP: Start calibration
- **Numbers**: DSP: Balance, DSP: Treble amount, SW: Gain, SW: High-pass frequency, VOL: Startup volume, VOL: Maximum volume, VOL: Step, VOL: Fixed level, SW: Low-pass frequency, SUR: Rear volume, DSP: Desk mode attenuation, DSP: Wall mode attenuation
- **Selects**: HW: Standby mode (20 min = ECO), HW: Second wake-up source (Default = none), HW: Master channel, HW: Cable mode, DSP: Bass extension, IR: Remote code, HW: Streaming quality, IR: Favourite button, IR: EQ 1, IR: EQ 2, SW: Polarity, DSP: Audio polarity, and 4 more
- **Sensors**: Backend, Speaker status, Play mode, Service ID, Wi-Fi signal level, Wi-Fi SSID, Wi-Fi frequency, Wi-Fi BSSID, Network ping, Network stability, Speed-test status, Speed-test average download, and 14 more
- **Switches**: SYS: Startup tone, HW: Auto-switch to HDMI, LED: Front, LED: Standby, LED: Top touch panel, LED: Top panel, LED: Top panel standby, HW: USB power / KW-1 mode, VOL: Use startup volume, VOL: Per-input startup volumes, VOL: Limiter, SW: Wake on startup, and 13 more
- **Texts**: SYS: UI language, SYS: Speaker location
- **Updates**: Firmware

## Troubleshooting

- **Diagnostics**: Downloads a diagnostics file to attach to a bug report.

## From the README

> Control your KEF speakers from Home Assistant over your home network, with no cloud account. Turn them on, change volume and input, and adjust the speaker settings you'd normally find in the KEF Connect app.

From the README of [EvotecIT/homeassistant-kef](https://github.com/EvotecIT/homeassistant-kef#readme), [MIT License](https://spdx.org/licenses/MIT.html). Shortened.

## At a glance

- Kind: Marketplace integration
- Category: [Media and entertainment](https://vulpo.app/integrations/category/media-and-entertainment.md)
- Number: 50 installs sharing analytics; 9 GitHub stars
- Connection: Works locally
- Upkeep: Updated in the last 6 months
- Needs: Needs the Marketplace (HACS on 2026.10 and older)
- Latest version: v0.8.43, last updated November 13, 2026
- Domain: `kef`
- Source: <https://github.com/EvotecIT/homeassistant-kef>
- Issues: <https://github.com/EvotecIT/homeassistant-kef/issues>
- Screenshot: https://vulpo.app/integrations-img/490864af1cc0e111.webp (from EvotecIT/homeassistant-kef's README)
- Screenshot: https://vulpo.app/integrations-img/76122f175c8ff33c.webp (from EvotecIT/homeassistant-kef's README)

In Vulpo: Quick Toggle card, Media Player card, Button card, Select card, Apple Watch, Control Center

Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation. [About these numbers](https://vulpo.app/integrations/about)

Last updated 2026-11-20. Source: https://vulpo.app/integrations/marketplace/evotecit-homeassistant-kef

---

- HTML version of this page: https://vulpo.app/integrations/marketplace/evotecit-homeassistant-kef
- Site index for agents: https://vulpo.app/llms.txt
- Everything in one document: https://vulpo.app/llms-full.txt
- All pages: https://vulpo.app/sitemap.xml
