---
title: "SmartCocoon"
description: "SmartCocoon is a Marketplace integration for Home Assistant. It has 82 installs sharing analytics, needs the vendor's cloud and was last updated November 5, 2026."
canonical: "https://vulpo.app/integrations/marketplace/davecpearce-ha-smartcocoon"
url: "https://vulpo.app/integrations/marketplace/davecpearce-ha-smartcocoon.md"
last-updated: "2026-11-05"
version: "1.4"
---

# SmartCocoon

> SmartCocoon is a Marketplace integration for Home Assistant. It has 82 installs sharing analytics, needs the vendor's cloud and was last updated November 5, 2026.

From the [repository description](https://github.com/davecpearce/ha-smartcocoon):

> This is a custom integration for Home Assistant. It enables control of SmartCocoon Smart Vent / Register Booster Fans

[Open in My Home Assistant](https://my.home-assistant.io/redirect/marketplace_repository/?owner=davecpearce&repository=ha-smartcocoon&category=integration)

On Home Assistant 2026.10 or older? [Open it in HACS](https://my.home-assistant.io/redirect/hacs_repository/?owner=davecpearce&repository=ha-smartcocoon&category=integration)

## Supports

- **Uses the vendor's cloud**: Needs an internet connection and an account with the vendor.
- **From the Marketplace**: Installed through the Marketplace, formerly HACS.
- **Actively maintained**: Its author released or pushed a change in the last six months.

## Setting it up

Install it from the Marketplace and restart Home Assistant, then add it under Settings, Devices and services.

### Connect

- **Username**
- **Password**
- **Enable Preset Modes**

### Re-authenticate SmartCocoon

- **Password**

### After setup

- **Enable Preset Modes**
- **Max Offline Duration**
- **Recovery Attempt Interval**
- **Max Recovery Attempts Per Hour**
- **Recovery Reset Interval**
- **Connection Check Interval**

Texts from the code of [davecpearce/ha-smartcocoon](https://github.com/davecpearce/ha-smartcocoon).

## From the README

> Disclaimer This is not an official integration from, or supported by, SmartCocoon.
>
> Introduction This is a custom integration for Home Assistant. It enables control of SmartCocoon Smart Vent / Register Booster Fans SmartCocoon.

From the README of [davecpearce/ha-smartcocoon](https://github.com/davecpearce/ha-smartcocoon#readme), [MIT License](https://spdx.org/licenses/MIT.html). Shortened.

## At a glance

- Kind: Marketplace integration
- Category: [Climate](https://vulpo.app/integrations/category/climate.md)
- Number: 82 installs sharing analytics; 19 GitHub stars
- Connection: Needs the vendor's cloud
- Upkeep: Updated in the last 6 months
- Needs: Needs the Marketplace (HACS on 2026.10 and older)
- Latest version: v1.5.1, last updated November 5, 2026
- Domain: `smartcocoon`
- Source: <https://github.com/davecpearce/ha-smartcocoon>
- Issues: <https://github.com/davecpearce/ha-smartcocoon/issues>

In Vulpo: Fan card, Apple Watch

Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation. [About these numbers](https://vulpo.app/integrations/about)

Last updated 2026-11-05. Source: https://vulpo.app/integrations/marketplace/davecpearce-ha-smartcocoon

---

- HTML version of this page: https://vulpo.app/integrations/marketplace/davecpearce-ha-smartcocoon
- Site index for agents: https://vulpo.app/llms.txt
- Everything in one document: https://vulpo.app/llms-full.txt
- All pages: https://vulpo.app/sitemap.xml