---
title: "SVS Subwoofer"
description: "SVS Subwoofer is a Marketplace integration for Home Assistant. It has 74 installs sharing analytics, works locally and was last updated November 19, 2026."
canonical: "https://vulpo.app/integrations/marketplace/dangerouslaser-svs-subwoofer-ha"
url: "https://vulpo.app/integrations/marketplace/dangerouslaser-svs-subwoofer-ha.md"
last-updated: "2026-11-22"
version: "1.4"
---

# SVS Subwoofer

> SVS Subwoofer is a Marketplace integration for Home Assistant. It has 74 installs sharing analytics, works locally and was last updated November 19, 2026.

From the [repository description](https://github.com/dangerouslaser/svs-subwoofer-ha):

> Home Assistant integration for SVS subwoofers via Bluetooth

[Open in My Home Assistant](https://my.home-assistant.io/redirect/marketplace_repository/?owner=dangerouslaser&repository=svs-subwoofer-ha&category=integration)

On Home Assistant 2026.10 or older? [Open it in HACS](https://my.home-assistant.io/redirect/hacs_repository/?owner=dangerouslaser&repository=svs-subwoofer-ha&category=integration)

## Supports

- **Works locally**: Talks to your devices on your own network. No vendor cloud in between.
- **Found by itself**: Home Assistant spots it on the network and offers to add it.
- **Device triggers**: Its devices can start automations directly.
- **From the Marketplace**: Installed through the Marketplace, formerly HACS.
- **Actively maintained**: Its author released or pushed a change in the last six months.

## Setting it up

Install it from the Marketplace and restart Home Assistant, then add it under Settings, Devices and services.

### Manual Setup

- **MAC Address**
- **Device Name**

### Confirm SVS Subwoofer

- **Device Name**

### Add SVS Subwoofer

- **Device**
- **Custom Name (optional)**

### Create a Subwoofer Group

- **Name**
- **Subwoofers**

### After setup

- **Connection**
- **Refresh interval**: While disconnected, how often Home Assistant briefly connects to refresh the subwoofer's settings, for example after a change made in the SVS app or on the rear panel. Each refresh briefly lights the panel LEDs. Must be longer than the connection hang-on time. Set to 0 to connect only when a command is sent.
- **Connection hang-on time**: How long the connection remains active after the last command. A shorter time frees the subwoofer for the SVS app sooner.
- **Subwoofers**

Texts from the code of [dangerouslaser/svs-subwoofer-ha](https://github.com/dangerouslaser/svs-subwoofer-ha).

## Entities

- **Binary sensors**: Connected
- **Buttons**: Reconnect, Disconnect, Save to Preset 1, Save to Preset 2, Save to Preset 3
- **Numbers**: Volume, Phase, Low Pass Filter Frequency, PEQ1 Frequency, PEQ1 Boost, PEQ1 Q-Factor, PEQ2 Frequency, PEQ2 Boost, PEQ2 Q-Factor, PEQ3 Frequency, PEQ3 Boost, PEQ3 Q-Factor
- **Selects**: Low Pass Filter Slope, Room Gain Frequency, Room Gain Slope, Standby Mode, Preset
- **Switches**: Low Pass Filter, PEQ1, PEQ2, PEQ3, Room Gain Compensation, Polarity (Inverted)

## From the README

> Control your SVS subwoofer directly from Home Assistant via Bluetooth. Full parameter access using the same protocol as the official SVS app.
>
> - Bluetooth auto-discovery of SVS subwoofers
> - Manual MAC address configuration option
> - Support for multiple subwoofers, and subwoofer groups that control several as one
> - Full parameter control:
> - Volume (-60 to 0 dB)
> - Phase (0-180 degrees)
> - Low Pass Filter (enable, frequency, slope)
> - 3-Band Parametric EQ (frequency, boost, Q-factor)
> - Room Gain Compensation
> - Polarity
> - Presets (1-4)
> - Standby Mode

From the README of [dangerouslaser/svs-subwoofer-ha](https://github.com/dangerouslaser/svs-subwoofer-ha#readme), [MIT License](https://spdx.org/licenses/MIT.html). Shortened.

## At a glance

- Kind: Marketplace integration
- Category: [Hubs and protocols](https://vulpo.app/integrations/category/hubs-and-protocols.md), Wireless protocols
- Number: 74 installs sharing analytics; 29 GitHub stars
- Connection: Works locally
- Upkeep: Updated in the last 6 months
- Needs: Needs the Marketplace (HACS on 2026.10 and older)
- Latest version: v1.10.1, last updated November 19, 2026
- Domain: `svs_subwoofer`
- Source: <https://github.com/dangerouslaser/svs-subwoofer-ha>
- Issues: <https://github.com/dangerouslaser/svs-subwoofer-ha/issues>

In Vulpo: Quick Toggle card, Button card, Select card, Apple Watch, Control Center

Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation. [About these numbers](https://vulpo.app/integrations/about)

Last updated 2026-11-22. Source: https://vulpo.app/integrations/marketplace/dangerouslaser-svs-subwoofer-ha

---

- HTML version of this page: https://vulpo.app/integrations/marketplace/dangerouslaser-svs-subwoofer-ha
- Site index for agents: https://vulpo.app/llms.txt
- Everything in one document: https://vulpo.app/llms-full.txt
- All pages: https://vulpo.app/sitemap.xml
