---
title: "Luxtronik"
description: "Luxtronik is a Marketplace integration for Home Assistant. It has 133 installs sharing analytics, works locally and was last updated September 11, 2023."
canonical: "https://vulpo.app/integrations/marketplace/bouni-luxtronik"
url: "https://vulpo.app/integrations/marketplace/bouni-luxtronik.md"
last-updated: "2026-10-22"
version: "1.4"
---

# Luxtronik

> Luxtronik is a Marketplace integration for Home Assistant. It has 133 installs sharing analytics, works locally and was last updated September 11, 2023.

Luxtronik is a local integration for heat pumps that use a Luxtronik controller. It adds sensors and binary sensors that read data from the controller over the network, and no extra hardware or software is needed beyond connecting the controller. A service lets automations write parameters, such as the operating mode of the heating, hot water, cooling, pool and ventilation circuits, and the hot water set point. Only a small share of the controller's parameters have a known function and can be written, because the protocol is not publicly documented. Writing unknown parameters is possible only after a safety setting is turned off. The README lists units from several manufacturers, including Alpha Innotec, Novelan, Roth, Elco, Buderus, Nibe and Wolf, and setup uses the configuration file with the controller's host and port.

Automatic summary of the README of Bouni/luxtronik. Something wrong, or are you the maintainer and want your own text here? [Get in touch](https://vulpo.app/contact)

[Open in My Home Assistant](https://my.home-assistant.io/redirect/hacs_repository/?owner=Bouni&repository=luxtronik&category=integration)

On Home Assistant 2026.11 or newer? [Open it in the Marketplace](https://my.home-assistant.io/redirect/marketplace_repository/?owner=Bouni&repository=luxtronik&category=integration)

## Supports

- **Works locally**: Talks to your devices on your own network. No vendor cloud in between.
- **From the Marketplace**: Installed through the Marketplace, formerly HACS.

## Setting it up

Install it from the Marketplace and restart Home Assistant. It is then set up in configuration.yaml.

## From the README

> This component has been created to be used with Home Assistant.
>
> Its only necessary to connect the Luxtronik controller to your network, no additional hard- or software is needed.

From the README of [Bouni/luxtronik](https://github.com/Bouni/luxtronik#readme), [MIT License](https://spdx.org/licenses/MIT.html). Shortened.

## At a glance

- Kind: Marketplace integration
- Category: [Climate](https://vulpo.app/integrations/category/climate.md), Heat pumps and air conditioning
- Number: 133 installs sharing analytics; 100 GitHub stars
- Connection: Works locally
- Upkeep: No update in over 18 months
- Needs: Needs the Marketplace (HACS on 2026.10 and older)
- Latest version: 2023.01.01, last updated September 11, 2023
- Domain: `luxtronik`
- Source: <https://github.com/Bouni/luxtronik>
- Issues: <https://github.com/Bouni/luxtronik/issues>

In Vulpo: Chart card, Apple Watch

Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation. [About these numbers](https://vulpo.app/integrations/about)

Last updated 2026-10-22. Source: https://vulpo.app/integrations/marketplace/bouni-luxtronik

---

- HTML version of this page: https://vulpo.app/integrations/marketplace/bouni-luxtronik
- Site index for agents: https://vulpo.app/llms.txt
- Everything in one document: https://vulpo.app/llms-full.txt
- All pages: https://vulpo.app/sitemap.xml