--- title: "Frigidaire" description: "Frigidaire is a Marketplace integration for Home Assistant. It has 201 installs sharing analytics, needs the vendor's cloud and was last updated October 18, 2026." canonical: "https://vulpo.app/integrations/marketplace/bm1549-home-assistant-frigidaire" url: "https://vulpo.app/integrations/marketplace/bm1549-home-assistant-frigidaire.md" last-updated: "2026-10-22" version: "1.4" --- # Frigidaire > Frigidaire is a Marketplace integration for Home Assistant. It has 201 installs sharing analytics, needs the vendor's cloud and was last updated October 18, 2026. Frigidaire is a Marketplace integration for Frigidaire WiFi-connected air conditioners and dehumidifiers, using the vendor's cloud API. Air conditioners get a climate entity with cool, auto, fan only, dry and off modes, fan speed, target temperature, a sleep preset, vertical swing and an on/off timer. Dehumidifiers get modes, target humidity control and fan speed selection. Optional per-device entities include an ionizer, display light, child lock, filter problem sensor, bucket status and filter runtime. An opt-in heat mode can be turned on for air conditioners confirmed to heat, and an opt-in compressor estimate adds a diagnostic sensor based on temperature and refines the reported activity. Setup is done in the UI with a username and password. Automatic summary of the README and code of bm1549/home-assistant-frigidaire. Something wrong, or are you the maintainer and want your own text here? [Get in touch](https://vulpo.app/contact) [Open in My Home Assistant](https://my.home-assistant.io/redirect/hacs_repository/?owner=bm1549&repository=home-assistant-frigidaire&category=integration) On Home Assistant 2026.11 or newer? [Open it in the Marketplace](https://my.home-assistant.io/redirect/marketplace_repository/?owner=bm1549&repository=home-assistant-frigidaire&category=integration) ## Supports - **Uses the vendor's cloud**: Needs an internet connection and an account with the vendor. - **From the Marketplace**: Installed through the Marketplace, formerly HACS. - **Actively maintained**: Its author released or pushed a change in the last six months. ## Setting it up Install it from the Marketplace and restart Home Assistant, then add it under Settings, Devices and services. ### Connect - **Password** - **Username** ### Choose a device - **Ionizer (Clean Air Mode)** - **Display Light** - **Child Lock** - **Check Filter**: Problem sensor that turns on when the filter state is CLEAN, CHANGE, or BUY. Use it to trigger filter-maintenance notifications. - **Bucket Status**: Shows Full when the water bucket needs emptying and Empty otherwise. Dehumidifiers only — models that report no bucket signal show as unavailable. - **Filter runtime**: Cumulative air-filter runtime reported by the appliance in native seconds. Home Assistant converts it to the configured display unit. - **Enable heat mode (confirmed heat-capable device only)**: Explicit opt-in for this appliance only. This does not detect heating capability; enable only after confirming the device supports heat. Temperature limits are unchanged. - **Enable compressor estimate**: Opt-in temperature-based estimate, not device telemetry. Adds a Compressor Estimate diagnostic sensor and refines hvac\_action while enabled on appliances that do not report modeState. - **Cooling hysteresis (degrees)**: Temperature deadband around the setpoint used by the estimate. Zero disables the deadband. - **Compressor off delay (seconds)**: How long the room must remain below the lower deadband boundary before the estimate changes to idle. ### Re-authenticate Frigidaire - **Password** ### After setup - **Ionizer (Clean Air Mode)** - **Display Light** - **Child Lock** - **Check Filter**: Problem sensor that turns on when the filter state is CLEAN, CHANGE, or BUY. Use it to trigger filter-maintenance notifications. - **Bucket Status**: Shows Full when the water bucket needs emptying and Empty otherwise. Dehumidifiers only — models that report no bucket signal show as unavailable. - **Filter runtime**: Cumulative air-filter runtime reported by the appliance in native seconds. Home Assistant converts it to the configured display unit. - **Enable heat mode (confirmed heat-capable device only)**: Explicit opt-in for this appliance only. This does not detect heating capability; enable only after confirming the device supports heat. Temperature limits are unchanged. - **Enable compressor estimate**: Opt-in temperature-based estimate, not device telemetry. Adds a Compressor Estimate diagnostic sensor and refines hvac\_action while enabled on appliances that do not report modeState. - **Cooling hysteresis (degrees)**: Temperature deadband around the setpoint used by the estimate. Zero disables the deadband. - **Compressor off delay (seconds)**: How long the room must remain below the lower deadband boundary before the estimate changes to idle. Texts from the code of [bm1549/home-assistant-frigidaire](https://github.com/bm1549/home-assistant-frigidaire). ## Troubleshooting - **Diagnostics**: Downloads a diagnostics file to attach to a bug report. ## From the README > A Home Assistant integration for Frigidaire WiFi-connected appliances, using the Frigidaire 2.0 (Electrolux) cloud API. > > - HVAC modes: Cool, Auto (Eco), Fan Only, Dry, Off > - Fan speed: Auto, Low, Medium, High > - Target temperature control (°F and °C) > - Preset modes: Sleep > - Swing modes: Vertical, Off > - ON/OFF timer control (30-minute increments, up to 24 hours) > - Extra state attributes: check\_filter, reported\_fan\_speed, and active\_alerts; the legacy current\_fan\_speed alias is retained for existing templates > - hvac\_action reflects the mode the appliance reports it is actually running, so an Eco/Auto unit shows cooling vs fan as it cycles rather than the requested mode From the README of [bm1549/home-assistant-frigidaire](https://github.com/bm1549/home-assistant-frigidaire#readme), [MIT License](https://spdx.org/licenses/MIT.html). Shortened. ## At a glance - Kind: Marketplace integration - Category: [Climate](https://vulpo.app/integrations/category/climate.md) - Number: 201 installs sharing analytics; 58 GitHub stars - Connection: Needs the vendor's cloud - Upkeep: Updated in the last 6 months - Needs: Needs the Marketplace (HACS on 2026.10 and older) - Latest version: 0.1.55, last updated October 18, 2026 - Domain: `frigidaire` - Source: - Issues: In Vulpo: Quick Toggle card, Climate card, Chart card, Apple Watch, Control Center, Climate Live Activity (Pro) [Widgets & Live Activities in Vulpo](https://vulpo.app/features/widgets-and-live-activities) Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation. [About these numbers](https://vulpo.app/integrations/about) Last updated 2026-10-22. Source: https://vulpo.app/integrations/marketplace/bm1549-home-assistant-frigidaire --- - HTML version of this page: https://vulpo.app/integrations/marketplace/bm1549-home-assistant-frigidaire - Site index for agents: https://vulpo.app/llms.txt - Everything in one document: https://vulpo.app/llms-full.txt - All pages: https://vulpo.app/sitemap.xml