--- title: "Drayton Wiser Integration for Home Assistant" description: "Drayton Wiser Integration for Home Assistant is a Marketplace integration for Home Assistant. It has 1.5k installs sharing analytics, works locally and was last updated October 26, 2026." canonical: "https://vulpo.app/integrations/marketplace/asantaga-wiserhomeassistantplatform" url: "https://vulpo.app/integrations/marketplace/asantaga-wiserhomeassistantplatform.md" last-updated: "2026-10-23" version: "1.4" --- # Drayton Wiser Integration for Home Assistant > Drayton Wiser Integration for Home Assistant is a Marketplace integration for Home Assistant. It has 1.5k installs sharing analytics, works locally and was last updated October 26, 2026. From the [repository description](https://github.com/asantaga/wiserHomeAssistantPlatform): > Platform and related climate/sensors to support the Drayton Wiser Home Heating System [Open in My Home Assistant](https://my.home-assistant.io/redirect/hacs_repository/?owner=asantaga&repository=wiserHomeAssistantPlatform&category=integration) On Home Assistant 2026.11 or newer? [Open it in the Marketplace](https://my.home-assistant.io/redirect/marketplace_repository/?owner=asantaga&repository=wiserHomeAssistantPlatform&category=integration) ## Supports - **Works locally**: Talks to your devices on your own network. No vendor cloud in between. - **Found by itself**: Home Assistant spots it on the network and offers to add it. - **Device triggers**: Its devices can start automations directly. - **From the Marketplace**: Installed through the Marketplace, formerly HACS. - **Actively maintained**: Its author released or pushed a change in the last six months. ## Setting it up Install it from the Marketplace and restart Home Assistant, then add it under Settings, Devices and services. ### Wiser Heat Hub Setup - **IP Address or Hostname** - **Port number** - **Secret Key** Also asked when confirming the device. ### After setup - **Legacy naming**: Include room names in Wiser device names. If enabled, using Home Assistant to regenerate entity IDs with the default format in Settings → System → Entity ID format (Home Assistant 2026.8 and later) will duplicate area names when the area and Wiser room names match. Changing this option does not rename existing entity IDs. - **Show Wiser in sidebar** - **IP Address or Hostname** - **Port number** - **Scan Interval (secs)** - **Default Heating Boost Temperature (°C)** - **Default Heating Boost Duration (mins)** - **Default Hot Water Boost Duration (mins)** - **Setpoint Mode** - **Use This Temperature If No Manual Temperature Is Stored** - **Passive Mode** - **Passive Mode Temperature Increments** - **Enable the climate entity** - **Enable experimental working mode** - **Hot Water Auto Mode** - **Hot Water Heat Mode** - **Hot Water Boost Mode** - **Hot Water Temperature Sensor** - **Rooms without climate control**: Select the Wiser rooms where a current schedule temperature sensor should be created. - **Enable equipment data sensors**: Expose an additional sensor containing detailed equipment attributes for each compatible smart plug, PowerTag, and heating actuator. - **Enable hot-water control** - **Manual temperature**: Temperature used by Manual mode. - **Optional external temperature sensor.**: Optional temperature sensor used for the current water temperature. OpenTherm is used when the sensor is unavailable. - **Presets** - **Boiler flow temperature** - **CH pressure** - **Boiler return temperature** - **Delta-T** - **Boiler exhaust temperature** - **Estimated boiler output** - **Hot water flow rate** - **Hot water temperature** - **Maximum boiler capacity** - **Minimum modulation level** - **Relative modulation level** - **Room temperature** - **Boiler CH maximum setpoint read/write** - **Boiler CH maximum setpoint transfer enabled** - **Boiler CH setpoint** - **Boiler CH setpoint lower bound** - **Boiler CH setpoint upper bound** - **CH flow active lower setpoint** - **CH flow active upper setpoint** - **CH1 flow enabled** - **CH1 flow setpoint** - **CH2 flow enabled** - **CH2 flow setpoint** - **Room setpoint** - **Boiler hot water setpoint** - **Boiler hot water setpoint lower bound** - **Boiler hot water setpoint read/write** - **Boiler hot water setpoint transfer enabled** - **Boiler hot water setpoint upper bound** - **Hot water enabled** - **Hot water flow setpoint** Texts from the code of [asantaga/wiserHomeAssistantPlatform](https://github.com/asantaga/wiserHomeAssistantPlatform). ## Entities - **Binary sensors**: Summer discomfort prevention, Summer comfort available, PCM device limit reached, Smoke alarm, Heat alarm, Tamper alarm, Fault warning, Remote alarm, Battery defect, AC mains, Test mode, Hush mode, and 25 more - **Buttons**: Boost all heating, Cancel all heating overrides, Boost hot water, Cancel hot water overrides, Toggle hot water - **Climate**: Heating, Floor temperature - **Numbers**: Away mode target temperature, Floor temperature offset, Indoor discomfort temperature, Outdoor discomfort temperature - **Selects**: Mode, Power-on behavior, LED indicator - **Sensors**: Signal, Report count, Cloud, Heating operation mode, Heating, Hot water, Hot water operation mode, Target temperature, Current schedule temperature, Floor temperature, Boiler flow temperature, Boiler return temperature, and 35 more - **Switches**: Valve protection, Eco mode, Away mode affects hot water, Comfort mode, Away mode, Daylight saving, Summer comfort enabled, Window detection, Include in summer comfort, Device lock, Identify, Outlet, and 11 more - **Water heaters**: OpenTherm hot water ## Actions - **Set OpenTherm parameter**: Changes a supported OpenTherm temperature parameter on the Wiser hub. Fields: Parameter, Temperature, Wiser hub ## Troubleshooting - **Diagnostics**: Downloads a diagnostics file to attach to a bug report. ## From the README > This repository contains a Home Assistant integration for the awesome Drayton Wiser Heating solution. This integration works locally with your wiser hub and does not rely on the cloud. > > It also supports some European versions of the Wiser Hub under the Schneider Electric brand, including support for lights and blinds. From the README of [asantaga/wiserHomeAssistantPlatform](https://github.com/asantaga/wiserHomeAssistantPlatform#readme), [MIT License](https://spdx.org/licenses/MIT.html). Shortened. ## At a glance - Kind: Marketplace integration - Category: [Climate](https://vulpo.app/integrations/category/climate.md), Thermostats and heating - Number: 1.5k installs sharing analytics; 330 GitHub stars - Connection: Works locally - Upkeep: Updated in the last 6 months - Needs: Needs the Marketplace (HACS on 2026.10 and older) - Latest version: v4.0.1, last updated October 26, 2026 - Domain: `wiser` - Source: - Issues: In Vulpo: Light card, Quick Toggle card, Cover card, Climate card, Apple Watch, Control Center, Climate Live Activity (Pro) [Widgets & Live Activities in Vulpo](https://vulpo.app/features/widgets-and-live-activities) Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation. [About these numbers](https://vulpo.app/integrations/about) Last updated 2026-10-23. Source: https://vulpo.app/integrations/marketplace/asantaga-wiserhomeassistantplatform --- - HTML version of this page: https://vulpo.app/integrations/marketplace/asantaga-wiserhomeassistantplatform - Site index for agents: https://vulpo.app/llms.txt - Everything in one document: https://vulpo.app/llms-full.txt - All pages: https://vulpo.app/sitemap.xml