---
title: "Frixos Projection Clock"
description: "Frixos Projection Clock is a Marketplace integration for Home Assistant. It has 51 installs sharing analytics, works locally and was last updated November 20, 2026."
canonical: "https://vulpo.app/integrations/marketplace/artlogicike-frixos-ha-integration"
url: "https://vulpo.app/integrations/marketplace/artlogicike-frixos-ha-integration.md"
last-updated: "2026-11-20"
version: "1.4"
---

# Frixos Projection Clock

> Frixos Projection Clock is a Marketplace integration for Home Assistant. It has 51 installs sharing analytics, works locally and was last updated November 20, 2026.

From the [repository description](https://github.com/ArtLogicIKE/frixos-ha-integration):

> Home Assistant (HA) Integration for Frixos Projection Clock Devices

[Open in My Home Assistant](https://my.home-assistant.io/redirect/marketplace_repository/?owner=ArtLogicIKE&repository=frixos-ha-integration&category=integration)

On Home Assistant 2026.10 or older? [Open it in HACS](https://my.home-assistant.io/redirect/hacs_repository/?owner=ArtLogicIKE&repository=frixos-ha-integration&category=integration)

## Supports

- **Works locally**: Talks to your devices on your own network. No vendor cloud in between.
- **From the Marketplace**: Installed through the Marketplace, formerly HACS.
- **Actively maintained**: Its author released or pushed a change in the last six months.

## Setting it up

Install it from the Marketplace and restart Home Assistant, then add it under Settings, Devices and services.

### Configure Frixos Device

- **Host (IP or hostname)**
- **Port**
- **Name**
- **Access password (only if one is set on the clock)**

### Frixos access password

- **Access password**

### Change Frixos Device Address

- **Host (IP or hostname)**
- **Port**
- **Access password (leave empty to keep the saved one)**

Texts from the code of [ArtLogicIKE/frixos-ha-integration](https://github.com/ArtLogicIKE/frixos-ha-integration).

## From the README

> A custom Home Assistant integration for controlling and monitoring Frixos devices.
>
> Requires firmware 70 (FW70) or later. Older firmware (including early layout-engine builds) is not supported by this integration version.
>
> - Layout presets: Apply ready-made or custom.layout files from the device without rebuilding the layout editor in HA
> - Compatibility entities: Most previous switches, numbers, selects, and texts remain available (see deprecation note above)
> - Safe message updates: Scrolling message and related layout-owned fields are written through /api/screen, not the legacy p16-only path
> - Monitoring: Light level, uptime, and heap sensors
> - Polling: Settings/status refresh every 5 minutes by default (plus a short settle delay after writes)

From the README of [ArtLogicIKE/frixos-ha-integration](https://github.com/ArtLogicIKE/frixos-ha-integration#readme), [MIT License](https://spdx.org/licenses/MIT.html). Shortened.

## At a glance

- Kind: Marketplace integration
- Number: 51 installs sharing analytics; 12 GitHub stars
- Connection: Works locally
- Upkeep: Updated in the last 6 months
- Needs: Needs the Marketplace (HACS on 2026.10 and older)
- Latest version: 1.4.0, last updated November 20, 2026
- Domain: `frixos`
- Source: <https://github.com/ArtLogicIKE/frixos-ha-integration>
- Issues: <https://github.com/ArtLogicIKE/frixos-ha-integration/issues>

In Vulpo: Quick Toggle card, Select card, Chart card, Apple Watch, Control Center

Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation. [About these numbers](https://vulpo.app/integrations/about)

Last updated 2026-11-20. Source: https://vulpo.app/integrations/marketplace/artlogicike-frixos-ha-integration

---

- HTML version of this page: https://vulpo.app/integrations/marketplace/artlogicike-frixos-ha-integration
- Site index for agents: https://vulpo.app/llms.txt
- Everything in one document: https://vulpo.app/llms-full.txt
- All pages: https://vulpo.app/sitemap.xml
