---
title: "Teltonika"
description: "Teltonika is a built-in integration for Home Assistant. It has 395 installs sharing analytics and works locally."
canonical: "https://vulpo.app/integrations/core/teltonika"
url: "https://vulpo.app/integrations/core/teltonika.md"
last-updated: "2026-10-22"
version: "1.4"
---

# Teltonika

> Teltonika is a built-in integration for Home Assistant. It has 395 installs sharing analytics and works locally.

Teltonika is a built-in Home Assistant integration that reads cellular status from Teltonika devices over the local network. It adds sensors for the mobile band, connection type, operator and signal quality readings such as RSRP, RSRQ, RSSI and SINR. Home Assistant can discover a device on the network and offer to add it. Setup happens in the UI with the device hostname or IP address, a username and a password. An option controls whether the SSL certificate is verified over HTTPS, and it usually needs to be turned off because most of these devices use self-signed certificates.

Automatic summary of Home Assistant's source code. Something wrong? [Get in touch](https://vulpo.app/contact)

[Open in My Home Assistant](https://my.home-assistant.io/redirect/config_flow_start/?domain=teltonika)

## Supports

- **Works locally**: Talks to your devices on your own network. No vendor cloud in between.
- **Set up in the UI**: Add it in Settings, Devices and services. Nothing to download.
- **Found by itself**: Home Assistant spots it on the network and offers to add it.
- **Silver quality**: Home Assistant's own rating of its code and setup experience.
- **Updated with Home Assistant**: Ships and updates with every Home Assistant release.

## Setting it up

Home Assistant usually finds it on the network and offers to add it. It can also be added by hand under Settings, Devices and services.

### Set up Teltonika device

- **Host**: The hostname or IP address of your Teltonika device.
- **Password**: The password to authenticate with the device.
- **Username**: The username to authenticate with the device.
- **Verify SSL certificate**: Whether to validate the SSL certificate when using HTTPS. Most Teltonika devices use self-signed certificates, so you will need to disable this option unless you have installed a valid certificate on your device.

### Discovered Teltonika device

- **Password**: The password to authenticate with the device.
- **Username**: The username to authenticate with the device.

Also asked when signing in again.

Texts from Home Assistant's source code, [Apache License 2.0](https://www.apache.org/licenses/LICENSE-2.0).

## Entities

- **Sensors**: Band, Connection type, Operator, RSRP, RSRQ, RSSI, SINR

## At a glance

- Kind: Built-in integration
- Category: [Computers and network](https://vulpo.app/integrations/category/computers-and-network.md), Routers and network
- Number: 395 installs sharing analytics
- Connection: Works locally
- Upkeep: Part of Home Assistant
- Needs: Built into Home Assistant
- Quality scale: Silver quality scale
- Domain: `teltonika`
- Source: <https://www.home-assistant.io/integrations/teltonika/>

In Vulpo: Chart card, Apple Watch

Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation. [About these numbers](https://vulpo.app/integrations/about)

Last updated 2026-10-22. Source: https://vulpo.app/integrations/core/teltonika

---

- HTML version of this page: https://vulpo.app/integrations/core/teltonika
- Site index for agents: https://vulpo.app/llms.txt
- Everything in one document: https://vulpo.app/llms-full.txt
- All pages: https://vulpo.app/sitemap.xml