---
title: "Subaru"
description: "Subaru is a built-in integration for Home Assistant. It has 573 installs sharing analytics and needs the vendor's cloud."
canonical: "https://vulpo.app/integrations/core/subaru"
url: "https://vulpo.app/integrations/core/subaru.md"
last-updated: "2026-10-22"
version: "1.4"
---

# Subaru

> Subaru is a built-in integration for Home Assistant. It has 573 installs sharing analytics and needs the vendor's cloud.

Subaru is a built-in integration that connects Home Assistant to MySubaru Connected Services for vehicle status and remote control. It adds sensors for fuel level, range, odometer, tire pressure, and average fuel consumption, plus EV battery level, range, and time to full charge on electric models. Binary sensors report the state of doors, hood, and tailgate, along with lock status, charging, EV plug, and vehicle health. A lock entity controls the door locks, buttons start and stop the engine remotely, and an action can unlock the driver door, all doors, or the tailgate. Setup happens in the UI with the MySubaru account details, a PIN for remote commands, and a two-factor code. An optional polling setting sends a remote command to the vehicle every 2 hours to refresh data, which draws power from the 12V battery.

Automatic summary of Home Assistant's source code. Something wrong? [Get in touch](https://vulpo.app/contact)

[Open in My Home Assistant](https://my.home-assistant.io/redirect/config_flow_start/?domain=subaru)

## Supports

- **Uses the vendor's cloud**: Needs an internet connection and an account with the vendor.
- **Set up in the UI**: Add it in Settings, Devices and services. Nothing to download.
- **Bronze quality**: Home Assistant's own rating of its code and setup experience.
- **Updated with Home Assistant**: Ships and updates with every Home Assistant release.

## Setting it up

It is added under Settings, Devices and services, with Add integration.

### MySubaru Connected Services configuration

- **Select country**: The country where your MySubaru account is registered.
- **Password**: The password for your MySubaru account.
- **Username**: The email address or username for your MySubaru account.

### MySubaru Connected Services configuration

- **PIN code**: The 4-digit PIN used for remote commands, shared by all vehicles on your MySubaru account.

### MySubaru Connected Services configuration

- **Please select a contact method:**: Where Subaru should send your two-factor authentication code.

### MySubaru Connected Services configuration

- **Validation code**: The 6-digit code sent to your selected contact method.

### After setup

- **Enable vehicle polling**: Sends a remote command to the vehicle every 2 hours to refresh sensor data. Draws power from the 12V battery.

Texts from Home Assistant's source code, [Apache License 2.0](https://www.apache.org/licenses/LICENSE-2.0).

## Entities

- **Binary sensors**: Tailgate, Hood, Door front left, Door front right, Door rear left, Door rear right, EV plug, Vehicle health, Charging, Lock status tailgate, Lock status front left, Lock status front right, and 26 more
- **Buttons**: Remote start, Remote stop
- **Locks**: Door locks
- **Sensors**: Average fuel consumption, EV battery level, EV range, EV time to full charge, Fuel level, Odometer, Range, Recommended tire pressure front, Recommended tire pressure rear, Tire pressure front left, Tire pressure front right, Tire pressure rear left, and 2 more

## Actions

- **Unlock specific door**: Unlocks the driver door, all doors, or the tailgate.
  Fields: Door

## Troubleshooting

- **Diagnostics**: Downloads a diagnostics file to attach to a bug report.

## At a glance

- Kind: Built-in integration
- Category: [Vehicles and transport](https://vulpo.app/integrations/category/vehicles-and-transport.md), Cars and EVs
- Number: 573 installs sharing analytics
- Connection: Needs the vendor's cloud
- Upkeep: Part of Home Assistant
- Needs: Built into Home Assistant
- Quality scale: Bronze quality scale
- Domain: `subaru`
- Source: <https://www.home-assistant.io/integrations/subaru/>

In Vulpo: Lock card, Button card, Chart card, Apple Watch

Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation. [About these numbers](https://vulpo.app/integrations/about)

Last updated 2026-10-22. Source: https://vulpo.app/integrations/core/subaru

---

- HTML version of this page: https://vulpo.app/integrations/core/subaru
- Site index for agents: https://vulpo.app/llms.txt
- Everything in one document: https://vulpo.app/llms-full.txt
- All pages: https://vulpo.app/sitemap.xml