---
title: "my-PV"
description: "my-PV is a built-in integration for Home Assistant. It has 234 installs sharing analytics and works locally."
canonical: "https://vulpo.app/integrations/core/my-pv"
url: "https://vulpo.app/integrations/core/my-pv.md"
last-updated: "2026-10-27"
version: "1.4"
---

# my-PV

> my-PV is a built-in integration for Home Assistant. It has 234 installs sharing analytics and works locally.

my-PV is a built-in integration that connects Home Assistant to my-PV devices over the local network. It adds sensors for network mode, phase currents, mains frequency, PV power, device status and several temperatures. Number entities cover the boost target temperature and the minimum and maximum hysteresis, while a select and a switch handle boost mode. The device is also exposed as a water heater, and buttons are available as well. Home Assistant can find the device on the network and offer to add it, and setup is done in the UI with the device host and password.

Automatic summary of Home Assistant's source code. Something wrong? [Get in touch](https://vulpo.app/contact)

[Open in My Home Assistant](https://my.home-assistant.io/redirect/config_flow_start/?domain=my_pv)

## Supports

- **Works locally**: Talks to your devices on your own network. No vendor cloud in between.
- **Set up in the UI**: Add it in Settings, Devices and services. Nothing to download.
- **Found by itself**: Home Assistant spots it on the network and offers to add it.
- **Bronze quality**: Home Assistant's own rating of its code and setup experience.
- **Updated with Home Assistant**: Ships and updates with every Home Assistant release.

## Setting it up

Home Assistant usually finds it on the network and offers to add it. It can also be added by hand under Settings, Devices and services.

### my-PV Device

- **Host**: The IP address or hostname of your my-PV device.

### Password

- **Password**: The password of your my-PV device. If no custom password is set you have to use the devicekey which can be found under the ⓘ info menu of your my-PV device. For the HEA•THOR IoT you can find the devicekey on the device label.

Also asked when at the discovery auth step and signing in again.

Texts from Home Assistant's source code, [Apache License 2.0](https://www.apache.org/licenses/LICENSE-2.0).

## Entities

- **Numbers**: Boost target temperature, Minimum hysteresis, Maximum hysteresis
- **Selects**: Boost mode
- **Sensors**: Network mode, Current phase L1, Current phase L2, Current phase L3, Mains frequency, PV power, Device status, Temperature 1, Temperature 2, Temperature 3, Temperature 4, Device temperature, and 6 more
- **Switches**: Boost mode

## At a glance

- Kind: Built-in integration
- Category: [Energy](https://vulpo.app/integrations/category/energy.md), Solar and batteries
- Number: 234 installs sharing analytics
- Connection: Works locally
- Upkeep: Part of Home Assistant
- Needs: Built into Home Assistant
- Quality scale: Bronze quality scale
- Domain: `my_pv`
- Source: <https://www.home-assistant.io/integrations/my_pv/>

In Vulpo: Quick Toggle card, Button card, Select card, Chart card, Apple Watch, Control Center

Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation. [About these numbers](https://vulpo.app/integrations/about)

Last updated 2026-10-27. Source: https://vulpo.app/integrations/core/my-pv

---

- HTML version of this page: https://vulpo.app/integrations/core/my-pv
- Site index for agents: https://vulpo.app/llms.txt
- Everything in one document: https://vulpo.app/llms-full.txt
- All pages: https://vulpo.app/sitemap.xml