---
title: "ZigStar TI CC2652P/P7 FW Flasher"
description: "ZigStar TI CC2652P/P7 FW Flasher is an app for Home Assistant. It has 1.7k installs sharing analytics and was last updated October 28, 2024."
canonical: "https://vulpo.app/integrations/apps/zigstar-cc2652p-flasher"
url: "https://vulpo.app/integrations/apps/zigstar-cc2652p-flasher.md"
last-updated: "2026-10-23"
version: "1.4"
---

# ZigStar TI CC2652P/P7 FW Flasher

> ZigStar TI CC2652P/P7 FW Flasher is an app for Home Assistant. It has 1.7k installs sharing analytics and was last updated October 28, 2024.

ZigStar TI CC2652P/P7 FW Flasher is an app that flashes firmware onto CC2652P wireless modules from Home Assistant. It can reach a coordinator over a network serial port, given as an IP address and port, or through a USB-attached adapter. Settings cover a network device entry, a switch for USB flashing, and a bootloader trigger option for network coordinators. The firmware to write can be chosen with a toggle or supplied as a raw GitHub link to the Z-Stack firmware. Progress is followed on the app log page, and a flash over the network takes about five to six minutes. It needs Home Assistant OS, has no sidebar page, and uses the Supervisor API.

Automatic summary of the docs and configuration of mercenaruss/zigstar\_addons. Something wrong, or are you the maintainer and want your own text here? [Get in touch](https://vulpo.app/contact)

[Open in My Home Assistant](https://my.home-assistant.io/redirect/supervisor_app/?app=193f5383_zigstar-cc2652p-flasher&repository_url=https%3A%2F%2Fgithub.com%2Fmercenaruss%2Fzigstar_addons)

Apps need Home Assistant OS. Container and Core installs cannot run them.

## Setting it up

Add its app repository under Settings, Apps, then install and start it.

## Permissions

- **Supervisor API**: Can talk to the Supervisor, which manages apps and the system.

## Configuration

- **Device**: The serial port where the CC2652P radio is connected to.
- **Network Device**: The ip address and port of your network connected CC2652P radio. IP\_ADDRESS:PORT
- **Network device/USB device**: Enable to flash USB device instead of Network Device (Requires you to trigger bootloader mode by holding BSL button while plugging in to USB)
- **Sonoff USB**: Enable to flash Sonoff USB device
- **Last Koenkk Firmware - CC1352P2\_CC2652P\_launchpad\_\*.zip**: Will download and flash last Koenkk firmware,CC1352P2\_CC2652P\_launchpad\_\*.zip. Used in Sonoff,ZigStar GW LAN and Stick
- **Last Koenkk Firmware - CC1352P7\_coordinator\_\*.zip**: Will download and flash last Koenkk firmware,CC1352P7\_coordinator\_\*.zip. Used in UZG v0.2 and up!
- **Last Koenkk Firmware - CC1352P2\_CC2652P\_other\_\*.zip**: Will download and flash last Koenkk firmware,CC1352P2\_CC2652P\_other\_\*.zip. Used in Ebyte based dongles.
- **Custom Firmware URL**: URL for custom firmware image you wish to flash. Please be sure to use the raw GitHub link.
- **Enable Bootloader mode for Network Device**: Enables the addon to trigger bootloader mode on Network Devices

## At a glance

- Kind: App
- Number: 1.7k installs sharing analytics
- Connection: Connection not stated
- Upkeep: No update in over 18 months
- Needs: Needs Home Assistant OS
- Runs on: 64-bit ARM, x86-64, 32-bit ARM (hard float), 32-bit ARM, 32-bit x86
- Latest version: 0.4.1, last updated October 28, 2024
- Source: <https://github.com/mercenaruss/zigstar_addons>

Independent directory, made by the developer of Vulpo. Not affiliated with Home Assistant or the Open Home Foundation. [About these numbers](https://vulpo.app/integrations/about)

Last updated 2026-10-23. Source: https://vulpo.app/integrations/apps/zigstar-cc2652p-flasher

---

- HTML version of this page: https://vulpo.app/integrations/apps/zigstar-cc2652p-flasher
- Site index for agents: https://vulpo.app/llms.txt
- Everything in one document: https://vulpo.app/llms-full.txt
- All pages: https://vulpo.app/sitemap.xml